I'm in a pickle and need some expert advice. I upgraded my PC from W8.1 to W10, all went very smooth. I then worked on upgrading a laptop SSD drive to from W8.1 to W10 which I planned to then install in my wife's laptop. It was easier for me to upgrade the drive on my PC then swap the drives than take her laptop for awhile. Well...that created my problem. I had 2 drive C's on my PC. I was able to boot quite a few times between the drives (swapping the primary drive in BIOS). But then W10 "fixed" my drives, and now I have only one C drive (the SSD laptop drive) and my original C drive is now F. My PC now only boots to the SSD C drive and I'm not able to use Disk Mgmt to swap the letters. Disconnecting the SSD drive stops the PC from booting because the original C drive is F.
I'm looking for help to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
Any help and suggestions are greatly appreciated. Thanks.
I'm looking for help to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
Any help and suggestions are greatly appreciated. Thanks.