[SOLVED] Swapping rad and fan from one gpu to another

[Thawks1536]

I've just bought a Asus 1050ti off my friend to replace my 750ti,


But the fan on the 1050 ti are far smaller there is only one and its very loud, the temps are much more than the 750 ti, is there any way I can put the rad and 2 fans from the 750 ti on the 1050 ti, if there's an adapter, bearing in mind that the plug for the fan is different.

I cannot put the single fan from original for the card on the rad as the mounting points are different.


1050 ti : https://www.amazon.co.uk/dp/B01M360WG6/ref=cm_sw_r_cp_apa_fabc_24ESRQPAEF9CNA3DQP2W

750ti:
https://www.amazon.ca/dp/B00J0ISHMQ/ref=cm_sw_r_wa_awdb_imm_5NG5KKBGAJ56CTDVFFZ2

 

[Lutfij]

Welcome to the forums, newcomer!

Make and model of the PSU used for your GPU?

For some odd reason both your links take me a search list on Amazon. Mind sharing a link from manufacturer's site?

I would ask you to keep the cooling solution for each card as is, since they might not be designed the same for cooling other parts of the PCB. Also, there are some instances of the height not being the same for all cooler's plates(the part that mounts to the GPU chip and has thermal paste on it.

Was the GTX1050Ti used for mining?

 

[Thawks1536]

Welcome to the forums, newcomer!

Make and model of the PSU used for your GPU?

For some odd reason both your links take me a search list on Amazon. Mind sharing a link from manufacturer's site?

I would ask you to keep the cooling solution for each card as is, since they might not be designed the same for cooling other parts of the PCB. Also, there are some instances of the height not being the same for all cooler's plates(the part that mounts to the GPU chip and has thermal paste on it.

Was the GTX1050Ti used for mining?

No both cards just used for games

1050 ti : https://www.asus.com/uk/Motherboards-Components/Graphics-Cards/All-series/PH-GTX1050TI-4G/


750 ti: https://www.evga.com/products/specs/gpu.aspx?pn=6a8f5e91-8aa1-49f6-9a4a-8ae25cad9d25

 

[FuryFoxx214]

Every card has its own architecture and design usually. Most of the time the exact same fans are replaced, uncommon to switch fans out unless its the same dimension as the previous fan (not including any type of special style some fans have). You could always try AIO, check out NZXT backplates.

Hope this helps.