Today I had just finished moving my PC to another house on an 8-hour drive. When I reached my destination and connect everything up, the monitor does not recognize any signal and when I look at the MB, the cpu light flashes which means that the MB does not recognize the cpu.
So, I tried reseating the CPU, cleaning and adding new thermal paste, and cleaning the case while at it(my case was very dirty). I even tried reseating the RAM just in case. However, all of it did not work. If anything, there were weird noise coming from CPU area (no sure if it's the fan) and my MB now does not recognize the RAM.
What should I do? BTW i checked all the pins already, none of them are bent in any way
So, I tried reseating the CPU, cleaning and adding new thermal paste, and cleaning the case while at it(my case was very dirty). I even tried reseating the RAM just in case. However, all of it did not work. If anything, there were weird noise coming from CPU area (no sure if it's the fan) and my MB now does not recognize the RAM.
What should I do? BTW i checked all the pins already, none of them are bent in any way
Facebook
Twitter
Instagram