[SOLVED] Thunderbolt 3 AIC R2.0 DRIVES detected on ASRock X570 Taichi ONLY on hot swap

Dec 3, 2020
1
0
10
Hi. I have 2 Thunderbolt 3 drives attached to the ASRock AIC R2.0 card. If I reboot, they are never recognized. I have to swap them every time and then they show.

Any idea where the problem likely originates?
 
Solution
Welcome to the forums, newcomer!

Might want to see if your motherboard has any BIOS updates pending. Then check and see that you're on the latest version for Windows 10. We're currently on version 20H2. Following that, see to it that you've manually installed Intel's Thunderbolt drivers in an elevated command, i.e, Right click installer>Run as Administrator.

Lutfij

Titan
Moderator
Welcome to the forums, newcomer!

Might want to see if your motherboard has any BIOS updates pending. Then check and see that you're on the latest version for Windows 10. We're currently on version 20H2. Following that, see to it that you've manually installed Intel's Thunderbolt drivers in an elevated command, i.e, Right click installer>Run as Administrator.
 
Solution