Tom's Hardware Member System Gallery

Page 71 - Seeking answers? Join the Tom's Hardware community: where nearly two million members share solutions and discuss the latest tech.
I was actually thinking about getting a Silver Stone Raven but they are just barely out of my price range right now. Next case upgrade will probably be the Corsair 800D though. But that won't be for a while 😛
 
I'll post mine again.

Antec Skeleton (full-sized)
Maximus Gene-Z
2600k @3.8
G-Skill Ripjaws 8GB @ 2133
EVGA GTX 590
Corsair Force GT 180GB SSD 6GB/s
Antec TX750 PSU
Lots of cable management

Extremely quiet, extremely fast machine.

uo3gz.jpg


316oqs7.jpg


ajtdz6.jpg


2llzgd3.jpg
 

cool little case you have there.
 
It was when I started, now its the Psycho Rider, just like its owner hehe
Its a bit modded from standard, it doesn't come with acrylic window, front panel is at top, not on the door and obviously the W/c kit is welded on afterwards
Moto
Yah ..I know .. Just wanted ya to post the pic again .. Nice build . Generally I dont like components outside the case but it works on your's . especially the res's .. good job :bounce:
 
I've also been thinking of sometime down the road building a small portable system/lanbox for lan parties and such, or whenever I need to bring it anywhere else.
 


If I can sum up my thoughts on this, it would probably be - perfectly simple
I like the case, very interesting look to it.
 
531442_10150710638961297_581451296_9941641_1131374687_n.jpg

540329_10150710639666297_581451296_9941643_797997626_n.jpg

564856_10150710640336297_581451296_9941645_1945053927_n.jpg

577735_10150710646396297_581451296_9941662_2033384340_n.jpg


Gaming Setup
Intel Core i5-750 Lynnfield 2.66GHz 8MB L3 Cache LGA 1156 Overclock @ 4.4GHz from 2.66GHz
XSPC Rasa CPU WaterBlock
Primochill PrimoFlex LRT Pro 1/2ID 3/4OD Tubing..
Distilled Water for Coolant\
XSPC Dual 5.25" Bay Reservoir - w/ Alphacool VPP655 Variable Speed Pump
6 XSPC 1/2"ID Bards and 2 Danger Den 1/2" ID & Two 1/2"ID Bitspower Bards
Magicool Ultra Thick 240mm Dual Radiator
Swiftech MCR240 Dual Radiator
XSPC RS240 Dual Radiator
Four Yate Loon 120mm 1650RPM (70.5 CFM)
GIGABYTE GA-P55-USB3 Motherboard F10g
Two OCZ VerTex 2 60GB SATA II MLC Internal Solid State Drive (SSD)
Western Digital 250GB HD (SATA)
Seagate Barracuda 32MB 500GB HDD
Total of 16GB G.Skill Sniper 8GB Kit 1600MHz 1.35V low voltage
With Kingston HyperX Ram Cooler (LED Blue)
Sapphire Radeon HD ATI 5850 HD 1GB GDDR5 256Bit
Overclock with MSI Afterburner @1GHz/1300 from 725/1000
with EK-FC5850 GPU water block
PNY Nvidia GTS 450 1GB GDDR5 (Dedicated PhysX Card)
Overclock with MSI Afterburner 910/1820/2000
Thermaltake Black Widow TR2 RX 850 Watt PSU 85+ PLUS Certified, PFC

Please visit us @ http://pchardwarecustompc.weebly.com/
 
@Keiki, nice setup. I like the look of it. Could do a bit better on cables but still pretty good. One example is your HDD cables, those could be tucked away a bit better.
 
SOLD:
N460GTX Hawks (TwinFrozr II) in SLI for $135 apiece ($270)... :bounce: :pt1cable: :kaola: 😗 :sol:

REPLACEMENT:
MSI N570GTX Twin Frozr III PE (Fermi) 1280MB 320-bit GDDR5 😉 :sol:

REASON:
1.) I can
2.) power consumption and heat
2a.) summertime approaches and it's hot already
3.) 1080P resolution not surround on this unit
4.) strong single card configuration
4a.) room on motherboard in-case PCI slots needed for 'real' tech-station..
5.) non-gaming unit so loosing a few frames if I do game on unit doesn't matter (factor in #2 and #3)

Man, you're going to enjoy that upgrade. I love your #1 reason.
 
525775_685453449413_78202766_32862724_2111927442_n.jpg


550244_685453499313_78202766_32862725_1518679270_n.jpg


398808_685453544223_2011561341_n.jpg


306183_685453309693_78202766_32862723_986762701_n.jpg


This is why I absolutely hate the 77 layout for mini-itx builds. Its just horrible, look at the usb 3.0 cable, the way it mounts there's no other way to feed it, on top of the fact that putting an aftermarket cooler would block the PCI X slot, which this client is going to put in a 660 when they are available so I had to stay with a stock cooler. I love the case, I hate the motherboard, and I'm very dissapointed in the processor, the i7 3770S should run way cooler even on stock heatsink.