I just finished building a system for my son. Here are the details:
.Motherboard: MSi p67A-C43
.CPU: Intel i5-2300 (not unlocked)
.RAM: Corsaire xms3 2x2GB DRR3 (total 4 GB)
.Chassis: Thermaltake V3 (VL8000 series)
.Power Supply: Thermaltake Purepower model HPC-420-102 DF (used... took it out of my old computer)
.Harddrive: Seagate Barracuda 7200 400GB (used... took it out of my old computer)
.CPU Fan: Freezer Pro 7 rev.
One quick before going into the real issue. One of the wires coming from the front panel is labeled "Power LED". The female connector has 3 holes. My motherboard only identifies 2 prongs on JFP1 as Power LED. I have tried connecting it anyhow and tried leaving that disconnected but still have the same problem. JPP2 has 1 prong identified as "Power LED".
OK, I put it together and pugged in the monitor and power cord. When I press the ON button, the LED to the chassis fan turns on and both the chassis fan and CPU fan turn on for less than a second then shut off. If I leave the power on, it cycles through this every few seconds but never makes a sound. The light on the CD Rom also flashes on and back of. The harddrive activation light stays off. Other that the sight fan noise, the system does not make any other sound.
I know that this is probably an impossible question for anyone to answer because I assume it could be almost anything but I will ask anyhow: What is going one?
.Motherboard: MSi p67A-C43
.CPU: Intel i5-2300 (not unlocked)
.RAM: Corsaire xms3 2x2GB DRR3 (total 4 GB)
.Chassis: Thermaltake V3 (VL8000 series)
.Power Supply: Thermaltake Purepower model HPC-420-102 DF (used... took it out of my old computer)
.Harddrive: Seagate Barracuda 7200 400GB (used... took it out of my old computer)
.CPU Fan: Freezer Pro 7 rev.
One quick before going into the real issue. One of the wires coming from the front panel is labeled "Power LED". The female connector has 3 holes. My motherboard only identifies 2 prongs on JFP1 as Power LED. I have tried connecting it anyhow and tried leaving that disconnected but still have the same problem. JPP2 has 1 prong identified as "Power LED".
OK, I put it together and pugged in the monitor and power cord. When I press the ON button, the LED to the chassis fan turns on and both the chassis fan and CPU fan turn on for less than a second then shut off. If I leave the power on, it cycles through this every few seconds but never makes a sound. The light on the CD Rom also flashes on and back of. The harddrive activation light stays off. Other that the sight fan noise, the system does not make any other sound.
I know that this is probably an impossible question for anyone to answer because I assume it could be almost anything but I will ask anyhow: What is going one?