[SOLVED] Two case fans not working ?

Znn

Commendable
Aug 30, 2022
79
13
1,545
So I have one back exhaust fan and one intake at front, both came with the case I had, both not working.

The 2 fans already connected with my case when it came (airflow 5000d) as shown in the picture labelled fan cable. The picture shows the chip having the right pin connected to > SATA cable > PSU. Left pin is connected to cpu_fan. Am I doing something wrong?

 
Last edited:
It's very difficult to follow that picture.
If I understand correctly, the pre-wired controller (for the front & rear, included fans) is connected to your CPU_fan header on the motherboard? If so, those are either the only fans connected in your system (no CPU cooler fan?),

What is the yellow.... and where does it go?
1.jpg
 
It's very difficult to follow that picture.
If I understand correctly, the pre-wired controller (for the front & rear, included fans) is connected to your CPU_fan header on the motherboard? If so, those are either the only fans connected in your system (no CPU cooler fan?),

What is the yellow.... and where does it go?
1.jpg
hey thx for replying, i actually forgot to mark this post resolved. both fans work when I connect the left wire (cpu_fan) to cpu_opt. the yellow is the wire for (cpu_fan)
 
  • Like
Reactions: Barty1884