Question UniFi Controller getting hot ?

[kamirajput]

Hi Good Morning,

I am facing an issue with UniFi controller, it is supposed to work on room temperature, but I have even install an AirCon but still controller is getting heated up so badly that I need to reboot it after every couple of hours. Can someone guide me if it is known issue or do I need to change some configuration to control the heating. I have installed a brand new controller recently, but still issue persist. How can I fix this issue or is someone else is having the same issue ?

Also, I have Domotz installed, and I need to configure temperature monitoring in it but I am unable to find the PID. If someone can help me in that I would be very grateful for that.

Thanks

Kamran

 

[kanewolf]

Hi Good Morning,

I am facing an issue with UniFi controller, it is supposed to work on room temperature, but I have even install an AirCon but still controller is getting heated up so badly that I need to reboot it after every couple of hours. Can someone guide me if it is known issue or do I need to change some configuration to control the heating. I have installed a brand new controller recently, but still issue persist. How can I fix this issue or is someone else is having the same issue ?

Also, I have Domotz installed, and I need to configure temperature monitoring in it but I am unable to find the PID. If someone can help me in that I would be very grateful for that.

Thanks

Kamran

Which hardware do you have? CloudKey V1 or V2?

 

[Ralston18]

More information needed.

Is it the on-site management system that is getting hot?

If yes then provide system specs.

This product?

https://dl.ubnt.com/guides/UniFi/UniFi_Controller_UG.pdf

Are you able to provide more information about your overall network setup?

For example, see physically numbered Page 1 of the User Guide with an example diagram.

 

[kamirajput]

Which hardware do you have? CloudKey V1 or V2?

I have UniFi OS UCK G2 Plus 2.4.8 and it support both V1, and V2. Thanks

 

[kamirajput]

More information needed.

Is it the on-site management system that is getting hot?

If yes then provide system specs.

This product?

https://dl.ubnt.com/guides/UniFi/UniFi_Controller_UG.pdf

Are you able to provide more information about your overall network setup?

For example, see physically numbered Page 1 of the User Guide with an example diagram.

Yes, this is on site management and the controller model is UniFi OS UCK G2 Plus 2.4.8

 

[kanewolf]

I have UniFi OS UCK G2 Plus 2.4.8 and it support both V1, and V2. Thanks

You have the V2 cloud key plus. Do you have a hard disk installed? Are you using protect? If so for how many cameras?

 

[Ralston18]

Domotz:

This software?

https://www.domotz.com/

And you are looking for PID as shown in Task Manager > Services?

Or in Process Explorer (Microsoft, free)

https://docs.microsoft.com/en-us/sysinternals/downloads/process-explorer

 

[kanewolf]

I believe you can turn on SNMP and use the standard Linux OIDs. Have you done an SNMPWALK ?

 

[kamirajput]

You have the V2 cloud key plus. Do you have a hard disk installed? Are you using protect? If so for how many cameras?

Yes, I do use protect and more than 8 cameras. Thanks

 

[kamirajput]

I believe you can turn on SNMP and use the standard Linux OIDs. Have you done an SNMPWALK ?

Can you please tell me how can I do that, I haven't done the SNMP walk so I have no idea how to do that. If you can provide me step by step guide, I would really appreciate it. Thanks

 

[kamirajput]

Domotz:

This software?

https://www.domotz.com/

And you are looking for PID as shown in Task Manager > Services?

Or in Process Explorer (Microsoft, free)

https://docs.microsoft.com/en-us/sysinternals/downloads/process-explorer

I am looking for PID for temperature monitoring so I can configure it in Domotz to monitor the temperature of my UniFi Controller. Thanks

 

[kanewolf]

I am looking for PID for temperature monitoring so I can configure it in Domotz to monitor the temperature of my UniFi Controller. Thanks

You mean OID rather than PID. That is the SNMP term.

 

[kamirajput]

You mean OID rather than PID. That is the SNMP term.

Correct , can you please assist me in that?

 

[kanewolf]

Correct , can you please assist me in that?

Have you done any reading about SNMP?