Upgrade Advice: Does Your Fast SSD Really Need SATA 6Gb/s?

Status
Not open for further replies.

compton

Distinguished
Aug 30, 2010
197
0
18,680
Buying the best drive rather than the perceived fastest is good advice. I have fast drives and slow drives, but I prize the reliable ones. The good news is that there are drives which are both fast and reliable, so don't buy a drive just because of its Vantage score or simply because of the speed with which it handles 0-fill data.
 

compton

Distinguished
Aug 30, 2010
197
0
18,680
Which FW is the 830 using? The Test Setup and Benchmarks page lists it as CXM0. There are currently 3 FWs, CXM[01,02,03]B1Q. The page simply lists CXM0.
 

phamhlam

Distinguished
Aug 24, 2011
384
0
18,810
Crucial m4, Samsung 830, and Intel 320 are all good drives. 128GB drives go for $180. They are the best value.

I find it interesting that SATA 3 doesn't make a difference in file copy. Most SATA 3 drives cost the same as a SATA 2 so no need to save a few dollars.
 

SteelCity1981

Distinguished
Sep 16, 2010
1,129
0
19,310
So basiucly what this is saying is even thought SATA 3 looks impressive on paper, when it comes to actual real world results it's really not any faster than SATA 2 in performaning everyday real world task.
 

dark_knight33

Distinguished
Aug 16, 2006
391
0
18,780
I think I wrote you an email asking for this article when I was looking to buy my SSD a few weeks/months ago. Even though your article came after I purchased mine, thanks for addressing it. I'm rocking a Vertex III 240GB on my Sata II x58 MB and I don't regret it one bit.
 

a4mula

Distinguished
Feb 3, 2009
973
0
19,160
I can say this. I'm running 2x OCZ Solid first gen SSDs off SATA 3Gb/s ICH10R. When new they benched at about 300/100 sequential read/write. Compared to current generation drives this is pretty slow. When researching my current build I asked a friend that just put together a rig with a 64GB M4 on Intel 6Gb/s if I could give it a spin. While his machine boots faster w/o a doubt, I attest most of this to the RAID verification I face when I boot. Inside Win7 I couldn't tell a difference at all. While I'm sure his system is faster, it just wasn't obvious or noticeable in my opinion.
 
What about quality? Is there any way to stress them till they start to fail? It just seems that if there isn't much difference in the drives in real world applications, then the next logical thing a buyer would want to know would be how much average data particuar drives can read/write before a failure. Like actual stress testing in a controlled environment. Come on Tom's, don't you want to destroy a few perfectly good SSD's? lol. These are things i would like to know more than anything else so I could make a very informed decision before a purchase.

I asked before but no one answered. Anyway here goes... If SSD's are supposed to be more reliable than spinning drives, why are most warranties for 3 years instead of the usual 5 years on high end conventional spinning drives? It seems like the companies are not to confident in their products to me, and that's why I ask this question and the one that preceded it. It would be nice to get some honest answers......
 

compton

Distinguished
Aug 30, 2010
197
0
18,680
[citation][nom]sincreator[/nom]What about quality? Is there any way to stress them till they start to fail? It just seems that if there isn't much difference in the drives in real world applications, then the next logical thing a buyer would want to know would be how much average data particuar drives can read/write before a failure. Like actual stress testing in a controlled environment. Come on Tom's, don't you want to destroy a few perfectly good SSD's? lol. These are things i would like to know more than anything else so I could make a very informed decision before a purchase. I asked before but no one answered. Anyway here goes... If SSD's are supposed to be more reliable than spinning drives, why are most warranties for 3 years instead of the usual 5 years on high end conventional spinning drives? It seems like the companies are not to confident in their products to me, and that's why I ask this question and the one that preceded it. It would be nice to get some honest answers......[/citation]

Well, the warranties are mostly 3 years, but some drives like Intel's 320s and Plextor's M3S drives do have 5 years of coverage.

As for stress testing... well... some have taken this matter in their own hands to answer that very question. So far, it's far more than anyone could imagine. And for complex reasons, a drive only writing 10GB might not wear out it's NAND in over a century. A drive's endurance is typically way underestimated. No one is going to wear out any 3xnm or 2xnm NAND in 5 years, except in the most extreme cases. Most drives die from firmware problems, or physical damage to the PCB or components, or some other unknown phenomenon. Only the factory could do a proper autopsy, and since the FW, FTL, controller, etc. are usually trade secrets or covered under NDA, no one in the know is going to volunteer.

There is an SSD endurance thread on the XtremeSystems forum:

http://www.xtremesystems.org/forums/showthread.php?271063-SSD-Write-Endurance-25nm-Vs-34nm/page1


 

heezdeadjim

Distinguished
Feb 1, 2012
11
0
18,510
You probably aren't going to see much of a difference in speed while on the desktop from one SSD to another. It's when loading programs and game levels that you might see a real difference in.

I know when I first got my 1st gen OCZ Vertex nearly when it first came out, I was always the first person on the map for Counter Strike. While other players were still loading the level, I would rush in from the side and lob a grenade and take a few people out because they didn't think anyone could get there so fast (now with more people with SSD's, it's not quite so funny anymore).

I do appreciate being able to open PS CS5 in less than 2 seconds (for quick photo re-edits) and opening Premiere a lot faster too. Transferring large RAW photo folders (think 50+GBs total) to and from backup HDD's, I could use the extra MB's from these new 6Gb/s versions.
 

SpadeM

Distinguished
Apr 13, 2009
284
0
18,790
While I do appreciate any SSD tests, I have to ask why do all the test include "big" capacity drives? I believe and hope that you should test with the lower end SSD (64 90 128) to paint a better picture for the user. You might not know this but most people believe that the difference between SSDs of the same maker is only in capacity not actual speed/iops which is wrong, very wrong. Therefor I suggest using lower capacity drives that are in larger numbers sold, then using more expensive drives that only skew the real numbers for the majority. The only refuge is in your own SBM for the cheaper systems in which you go for a lower tier SSD but since tests there focus on gaming, we aren't getting much. Informative article non the less.

 

LORD_ORION

Distinguished
Sep 12, 2007
814
0
18,980
I cringe when I hear "buy what you can afford" when it comes to hard drives.

YOU MUST GET A 5 YEAR WARRANTY if you want to be happy. They really do determine their hard drive warranty based on average time to fail results from quality control tests.

Intel 320 80GB looks like a nice intro SSD drive.
 

deanjo

Distinguished
Sep 30, 2008
113
0
18,680
As expected, you are better off with a couple off with a couple of mechanical drives in raid 0 for items like video editing. More capacity, faster sequential read/writes, and cheaper.
 
G

Guest

Guest
I have run my VM over a USB 2.0 on an SSD and still got similar performance to Sata II. Its the latency that is the issue, 30MB/s is actually fine as long as the response is there. Of course, when you want move large files its a different story.
 
Interesting article, relatively narrow in scope. On consumer lines it is very difficult to choose the 'best' SSD. On Enterprise it's more about Write cycles and IOPS; so I look at IOPS over max R/W speeds. When I buy I look at: Cost, Reliability, IOPS (R/W), Warranty and Capacity. A lot of 'bad' reviews, not all, are over Firmware problems and before I even install the SSD I update the Firmware. I don't care about 1~3 second 'Boot' time difference. Even for me it gets mind numbing to choose, but for most 'PC' uses Capacity vs Cost is the tipping point.

I wish it were simple to choose a consumer SSD, but it's not and Reviewers often choose different SSD's typically based upon their need aka preferences.

I thought the following might help (note the operative words 'Up to'):

Samsung 830 MZ-7PC256D/AM
MTBF 1,500,000 hours
Warranty 3 Years
Max Sequential Read Up to 520 MB/s
Max Sequential Write Up to 400 MB/s
4KB Random Read: Up to 80,000 IOPS
4KB Random Write: Up to 36,000 IOPS

Crucial M4 CT256M4SSD2 ; 5 models which was tested?
MTBF 1,200,000 hours
Warranty 3 Years
Max Sequential Read Up to 550 MB/s ; 415~550 MB/s
Max Sequential Write Up to 260 MB/s
4KB Random Read: Up to 45,000 IOPS
4KB Random Write: Up to 50,000 IOPS

OCZ Vertex 3 VTX3-25SAT3-240G ; 3 models which was tested?
MTBF 2,000,000 hours
Warranty 3 Years
Max Sequential Read Up to 550 MB/s ; 415~550 MB/s
Max Sequential Write Up to 520 MB/s ; 500~520 MB/s
4KB Random Read: Up to 40,000 IOPS 36,000~55,000 IOPS
4KB Random Write: Up to 60,000 IOPS 55,000~60.000 IOPS

Intel 320 Series SSDSA2CW300G310 ; 5 models which was tested?
MTBF 1,200,000 hours
Warranty 1 Year (most) ; SSDSA2CW300G3B5 5 years
Max Sequential Read Up to 270 MB/s
Max Sequential Write Up to 205 MB/s
4KB Random Read: Up to 39,500 IOPS some models unlisted
4KB Random Write: Up to 23,000 IOPS some models unlisted
/only SATA2 interface/
 

mcd023

Distinguished
Nov 9, 2010
370
0
18,780
Thanks for the article! I was wondering about what to do since my mobo only has SATA 2. It looks like my plan for a couple of kingston 64GB in RAID 0 might still be a good idea.
 

SpadeM

Distinguished
Apr 13, 2009
284
0
18,790
[citation][nom]cmcghee358[/nom]SpadeM,you obviously didn't read the article as there were plenty of references to the 60/64 GB SSD round from a couple months ago.[/citation]
And you obviously didn't bother understanding my post. This isn't something that only Tom's does, most if not all sites when it comes to SSD testing, go for higher capacity drives while the low end kind of gets the short end of the stick. And since performance for SSD is even capacity related, then the majority of ssd sold (those under 128GB) should get more lime light.

I do hope now my point gets across, if not, I'm sorry but there's nothing I can do to fix it.
 

OntarioHero

Distinguished
Nov 19, 2010
10
0
18,510
[citation][nom]compton[/nom]Well, the warranties are mostly 3 years, but some drives like Intel's 320s and Plextor's M3S drives do have 5 years of coverage.As for stress testing... well... some have taken this matter in their own hands to answer that very question. So far, it's far more than anyone could imagine. And for complex reasons, a drive only writing 10GB might not wear out it's NAND in over a century. A drive's endurance is typically way underestimated.[/citation]

Well, that seemed to be the case initially - users were wondering why these ssds were covered for 30TB or less when they could write more than 10x that reliably. But it turns out that once nand cells go over the rated write cycles, the ability to retain data in long term decreases significantly. It's something the folks at xtremesystems didn't notice at first because they were running the test 24/7 - the cells were getting flashed with new data before the data had a chance to degrade.

In more realistic usage scenarios where the pcs may be turned off for more than a day (or when nothing is being written to ssd and cells are not continuously flashed with new data), the manufacturer's endurance claims are pretty realistic.
 
[citation][nom]SpadeM[/nom]And you obviously didn't bother understanding my post. This isn't something that only Tom's does, most if not all sites when it comes to SSD testing, go for higher capacity drives while the low end kind of gets the short end of the stick. And since performance for SSD is even capacity related, then the majority of ssd sold (those under 128GB) should get more lime light. I do hope now my point gets across, if not, I'm sorry but there's nothing I can do to fix it.[/citation]

You have a point but the order of performance in this test should be the same even with the slower, lower capacity drives. I think they did a comprehensive test of 60-64 capacity drives within the last few months similar to this one, not just a gaming comparison.
 

Marcus52

Distinguished
Jun 11, 2008
619
0
19,010
[citation][nom]SpadeM[/nom]While I do appreciate any SSD tests, I have to ask why do all the test include "big" capacity drives? I believe and hope that you should test with the lower end SSD (64 90 128) to paint a better picture for the user. You might not know this but most people believe that the difference between SSDs of the same maker is only in capacity not actual speed/iops which is wrong, very wrong. Therefor I suggest using lower capacity drives that are in larger numbers sold, then using more expensive drives that only skew the real numbers for the majority. The only refuge is in your own SBM for the cheaper systems in which you go for a lower tier SSD but since tests there focus on gaming, we aren't getting much. Informative article non the less.[/citation]

Most review sites (I know this is true for Tomshardware because it has been stated by editors many times) review hardware that is sent to them by the manufacturer. Because the larger capacity SSDs are faster, as you say, I think that they send that to sites like Tomshardware to get the best test numbers they can. So, the only way they would test smaller drives is if they were sent smaller drives.

Now, I don't actually know anything about Tomshardware's financial situation, but from my point of view it looks like they are a profit-making entity with enough income that they might consider changing ways established when it was pretty much a non-profit thing. In other words, I'd like to see them buy some of the hardware and not rely on manufacturers to send it to them. Whether that's feasible, or something they want to do, I don't know.

;)
 

Marcus52

Distinguished
Jun 11, 2008
619
0
19,010
[citation][nom]sincreator[/nom]What about quality? Is there any way to stress them till they start to fail? It just seems that if there isn't much difference in the drives in real world applications, then the next logical thing a buyer would want to know would be how much average data particuar drives can read/write before a failure. Like actual stress testing in a controlled environment. Come on Tom's, don't you want to destroy a few perfectly good SSD's? lol. These are things i would like to know more than anything else so I could make a very informed decision before a purchase. I asked before but no one answered. Anyway here goes... If SSD's are supposed to be more reliable than spinning drives, why are most warranties for 3 years instead of the usual 5 years on high end conventional spinning drives? It seems like the companies are not to confident in their products to me, and that's why I ask this question and the one that preceded it. It would be nice to get some honest answers......[/citation]

Hard drive manufacturers have been cutting their warranties down. Many Western Digital drives (for example) that had 5 year warranties in the past now have 3 year warranties. I have no idea why.

The real quality test though is going to be a history of reliability across many thousands of users over time. I know Anand over an Anandtech.com has used SSDs for quite a few years now, having become a fan well before SSDs were the cool thing. His servers have been quite reliable. However, a history of business-use servers having SSDs made with reliability in mind doesn't give us a lot to go by when we are deciding what to put in our desktops at home.

I don't know why the warranties aren't longer, except to say that manufacturers themselves are probably waiting to see how well their products last in the real world before they commit to longer warranties. Warranties are not, unfortunately, just something done to protect end-users though, they are also marketing tools, and accountants and management have their say as well. So, while looking at a longer warranty might be a clue to the reliability of the product (it is certainly something I strongly consider), it could also be that the marketing staff of one company decided to publish a longer warranty time just to entice buyers.

Personally, I wouldn't have a problem buying any SSD from a major company these days. I'm pretty confident that whatever I would buy would be something I wanted to replace in order to have the "newest and fastest" well before its warranty went or it failed. :D (Of course, affording to replace it when I want to is a different story . . .)

;)
 

boletus

Distinguished
Mar 19, 2010
69
0
18,630
Don't hold off on getting an SSD because you are using a SATA 2 mobo; this article does a great job showing why it is a worthwhile upgrade. But if you were already considering upgrading your mobo anyway, perhaps you're not running Win 7, which does make a big difference from what I understand (Linux aside for this discussion). And what better time to replace a mobo is there than when you are replacing your OS?
 
Status
Not open for further replies.