hi everyone. I'm new here.. this morning I decided to upgrade my cpu from Pentium G2010 to Core i5 2500... The i5 is used unit and I bought it online.. They tested before shipped to me and everything is good.. back to my issue, I followed the instructions, all is ok except for stock Intel heatsink, which I broke 3 of the 4 push pin.. But the one left holds up quite nicely to the board.. So I decided to continue with it.. My computer boot up, for at least a second then restart before boot up normally.. No beep, no any bad burning smell whatever,. But no display, it just black.. I try to switch in between my gpu and igpu, still no luck.. Try many other things, reseat the ram, clear cmos jumper, cmos battery still no luck.. Please help me out.. Thanks in advance. 😬
MY SPEC
CPU: Intel Core i5 2500 3.3Ghz
GPU: Asus GT630 2GB
HDD: 500GB Seagate/500GB Hitachi
MOTHERBOARD: Asus P8h61-M Plus v3
RAM: 4GB Kingston 1333Mhz +2GB Kingston 1333Mhz
PSU: 500w
NOTE : all of my spec are the same as previously with Pentium G2010, except for the i5 processor
MY SPEC
CPU: Intel Core i5 2500 3.3Ghz
GPU: Asus GT630 2GB
HDD: 500GB Seagate/500GB Hitachi
MOTHERBOARD: Asus P8h61-M Plus v3
RAM: 4GB Kingston 1333Mhz +2GB Kingston 1333Mhz
PSU: 500w
NOTE : all of my spec are the same as previously with Pentium G2010, except for the i5 processor
Last edited: