I would be grateful for any advice . I've just purchased a new MSI NVIDIA GEFORCE GTX 1050Ti for my small form factor HP PC. Everything was going fine until I noticed the 41A-Front USB cable casing was preventing the GPU clicking into place.
I've tried removing the USB cable then replacing (once the GPU is installed correctly) but the USB casing is fractions too big. I've also tried disconnecting the USB 2 cable (which I don't need) from the motherboard but on restart the PC warns about the disconnection and goes into safe mode. When in safe mode both my keyboard and mouse are operational. So my question is how do I remove 41A-Front USB from the bios setting or is it possible to modify or replace the USB 2 casing which is millimeters too big. Thanks in advance.
I've tried removing the USB cable then replacing (once the GPU is installed correctly) but the USB casing is fractions too big. I've also tried disconnecting the USB 2 cable (which I don't need) from the motherboard but on restart the PC warns about the disconnection and goes into safe mode. When in safe mode both my keyboard and mouse are operational. So my question is how do I remove 41A-Front USB from the bios setting or is it possible to modify or replace the USB 2 casing which is millimeters too big. Thanks in advance.