Question USB Powered LED Light

[binudothe]

Hi Team,

How can i connect Power bank ---> USB cable --> LED bulb in case of power failure.

My components details:
1. Power bank - Mi 20000mAH Li-Polymer Power Bank 2i (White)
(Link - https://www.amazon.in/gp/product/B077RV8CCZ/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1)

1. USB cable - Old usb cable
2. One LED bulb - Eveready Base B22 9-Watt LED Bulb (Cool Day White Light)

(Link - https://www.amazon.in/Eveready-Base...3807&sr=8-2-fkmr1&keywords=everyday+9watt+led)

Thanks in advance

 

[CountMike]

Can't, Power bank is 5vDC and lights are 220v.

 

[jay32267]

Maybe try this. It seems to be what you are looking for.

https://www.amazon.in/Saish-Solutio...s=5V+Led+bulb&qid=1557322502&s=gateway&sr=8-3

 

[binudothe]

Can't, Power bank is 5vDC and lights are 220v.

Thank you CountMike

 

[binudothe]

Maybe try this. It seems to be what you are looking for.

https://www.amazon.in/Saish-Solutio...s=5V+Led+bulb&qid=1557322502&s=gateway&sr=8-3

The link is really helpful to me. Thank you very much.
The product is plug and play tube light.
Can I achieve the same way with "my components" to covert 5volt to 220 volt output discharge by adopting some kind of conversion than plug into power bank.

 

[CountMike]

No, not like that, There's no conversion to 220v here, LED diods themselves work at 3.3 -5v topically so high voltage LED light bulbs have electronic converter to low voltage. Others, working at 12v for instance usually have LED diods in serial connection or just slap a resistor in it.

 

[jay32267]

The link is really helpful to me. Thank you very much.
The product is plug and play tube light.
Can I achieve the same way with "my components" to covert 5volt to 220 volt output discharge by adopting some kind of conversion than plug into power bank.

For this situation....I don't see an economical way to convert 5 VDC to 220 VAC that I am aware of.

 

[binudothe]

The link is really helpful to me. Thank you very much.
The product is plug and play tube light.
Can I achieve the same way with "my components" to covert 5volt to 220 volt output discharge by adopting some kind of conversion than plug into power bank.

Thank you very much

 

[binudothe]

No, not like that, There's no conversion to 220v here, LED diods themselves work at 3.3 -5v topically so high voltage LED light bulbs have electronic converter to low voltage. Others, working at 12v for instance usually have LED diods in serial connection or just slap a resistor in it.

Thank you very much

Closing this question.