Question Water temp is soo high

[deno1000]

I play csgo and i have soo high water temp...How to fix this high water temp? i try balance mode and custom..

http://prntscr.com/odsoj9

 

[rgd1101]

50c? too high?

 

[deno1000]

50c? too high?

this is liquid temerature not CPU

 

[rgd1101]

what cpu/liquid temp did you see?

 

[deno1000]

this is liquid http://prntscr.com/odsvlx and i dont know why temp is soo high 41...

 

[mark1776]

Fans need to speed up more, I think. I'd expect 1700 - 2000 instead of the ~1000 your screen shot is showing.

 

[deno1000]

Fans need to speed up more, I think. I'd expect 1700 - 2000 instead of the ~1000 your screen shot is showing.

yes but again high temp http://prntscr.com/oe8kkn

 

[mark1776]

What's the core temp for the CPU? That's what you care about. If the core is only 10 or 15 above the water temp, then you are still fine. Water temp is indirect - cpu core temp is direct. You can still raise the fan speed more, as you are just around 60% at the reported 47 C.

 

[Crosslhs82x2]

It wouldn't hurt to run the pump on extreme.
I run mine the all the time
I have h100i v2 -2 x h110i
H100i on fx6300
H110i on fx8350
H110i on a r5 2600x

 

[Crosslhs82x2]

Would also help to know your system specs.

 

[deno1000]

What's the core temp for the CPU? That's what you care about. If the core is only 10 or 15 above the water temp, then you are still fine. Water temp is indirect - cpu core temp is direct. You can still raise the fan speed more, as you are just around 60% at the reported 47 C.

my PC SPEC:

CPU: Intel i9-9900K@H100I Corsair RGB

MBO: Asus Rog Strix Z390-F GAMING

RAM: Corsair Vengeance RGB PRO 16 GB @3200MHz

HDD: SSD ADATA XPG Gammix 1TB M.2 PCIe

VGA: Gigabayte RTX 2070 OC 8GB

Napajanje: Seasonic FOCUS plus 750w gold

Monitor: Benq 24 @144hz

OS: Windows 10 64bit

CPU TEMP INGAME:60~75 PUBG or DOTA..
Water temp 42~52

 

[Crosslhs82x2]

Set pump speed to extreme to move more water through rad.
I have my rad up top and fans as exhsust
How is yours setup?

 

[deno1000]

Ok i set pum speed extreme. http://prntscr.com/oejuhk and again high water temp
this is my setup
http://prntscr.com/oeiyq6
give me pic of ur setup pls

 

[Crosslhs82x2]

I can maybe try it again but will have to be at least wed to thurs next week.
I haven't had very good luck sending pics.

I am able to use corsair link 4 (i like it better) on 2 of the coolers as there is nothing rgb or anything like void headsets on those systems.
Only 1 is running IQUE because of void headsets.
From your last pic the temp is way better now but i think you would be better off running the fans in balanced for normal day to day use, and performance or extreme for gaming or any stress testing,
Or set a more aggressive fan curve for the i9.

What other software are you using to monitor the temp as corsair's don't always
Show you correct temps.
Hwinfo64 is what i use the most.

I will put up with more noise from higher rpm's on those fans as long as the cooler is keeping the temp in check.
But everybody has their own noise levels of what is acceptable.

 

[deno1000]

if I put fans balance fans going 2600RPM ingame noise iss soo high..Best options is custom curve i think.
http://prntscr.com/oeltqh

 

[Crosslhs82x2]

1 thing you could try
On the right where it's showing the 35.?? Temp click on that and see if you can change that to h100i the see what balanced does and recheck temps.
So what are you true temps Not corsair readings.

 

[deno1000]

this http://prntscr.com/oemgxg ? i cnt click this..
41 c is water TEMP not CPU this is high or what ?

 

[Crosslhs82x2]

Ok ya that is the biggest thing about ique
I don't like vs corsar link 4.
Link 4 has more control over the cooler.

Install hwinfo64.
run sensors only it may ask about including the corsair tell it no.

You can't just rely on the ique it dosen't give you correct cpu temp.

 

[deno1000]

this ? http://prntscr.com/oemrpj
http://prntscr.com/oen0bh but on this softwer i dont see AIO temp

corsar link 4 is softwer or hardwer? LOL

 

[Crosslhs82x2]

Corsair link 4 is software and install the drivers also. Which is your 2nd scrnsht.
You have no control in it when ique is installed.

From your 1st scrnsht was that gaming or idle because ALL of your temps are high CPU, RAM, GPU , DRIVES
is the room the system is in hot?
Where do you have the rad front, top?
Fans set as intake or exhaust?
And how many other fans do you have ?

 

[deno1000]

Corsair link 4 is software and install the drivers also. Which is your 2nd scrnsht.
You have no control in it when ique is installed.

From your 1st scrnsht was that gaming or idle because ALL of your temps are high CPU, RAM, GPU , DRIVES
is the room the system is in hot?
Where do you have the rad front, top?
Fans set as intake or exhaust?
And how many other fans do you have ?

Yes this is ingame temp but ALT TAB
I unistal ique and again not see AIO control and temps...
RAD top
I have 3 be quiet fans.

 

[Crosslhs82x2]

Reinstall corsair link
It well remove first when it asks if you want to remove config files click yes.
Then open again to run install again
After installed shut down and reboot.

 

[Crosslhs82x2]

Ok so sounds like 1 back 2 front 2 on cooler you only giving small amounts of info.
Are the rad fans blowing into or out the case.

 

[deno1000]

Reinstall corsair link
It well remove first when it asks if you want to remove config files click yes.
Then open again to run install again
After installed shut down and reboot.

and again i dont see AIO... http://prntscr.com/oesvv3

Yes 1 back 2 front 2 on cooler this is my setup fans.
Fans blowing out the case.

 

[Crosslhs82x2]

Ok did you reboot after install ?
The last pic at idle temps look normal
1 fan showing 4300rpm strange?
But everything else looking good so between pics idle and gaming it's doing pretty good for gaming if it stayed close to those temps during session.


Look in device manager in the usb at the bottom
Look for a corsair usb 3 something if there is 1 right click it on 1 of mine it needed to be enabled before it would show the pump and fans.

From the corsair download site at least there is the other vervions of the link so you may have to go back a few versions.
But if you have to then do the corsIr install again to remove and removing config files when it asks.
Then use Ccleaner to clean up any left overs
Then try install again.
Then again reboot after install.
Then checking device manager again.