Watercooling suggestion for 2 x 2011v3 / 48 core + 4 x Titan X

[Calin Cristian]

Water cooling advice request: urgent 🙁
I have the following components to apply water cooling on:
**************************
Asus z10 pe d8 ws ( water block excepting the RAM)
( 2 x E5 2680v3)
4 x TITAN X ( EVGA )
I am looking for soft tubes / 3 x pumps redundant for non stop operation without supervision)
Option to place the radiator outdoor on max 5 meter distance.
____________________
I found online some solutions from EKWB, but I don't understand from tubing and fitting. Very confusing for me.
Will be great if you can paste me some links where to order the entire set so all will fit together.

Thank you in advance !
I wait your suggestions.

Best regards,
Cristian

 

[grimfox]

The important thing to look at is the threading, and tube size. For sanity I recommend getting all your fittings from whoever made the water blocks you are using. EKWB uses almost exclusively G1/4 thread (this is the size of the screw that goes into the water block) fittings. Because of the quantity of parts you are cooling, a broad tube 1/2" (13mm) or greater is probably a good idea. Since you need high reliability I would say compression fittings are probably in your best interest. So, You'll want a compression fitting that connects G1/4 threads to 1/2" (13mm) tubing.

That's kinda high level. For more specifics you'll want to provide some links or part numbers for the specific LC hardware you are planning on.

 

[Calin Cristian]

I found those components till now but is difficult with the adaptors :
Quad connexion
https://www.ekwb.com/shop/ek-fc-terminal-quad-semi-parallel
VGA waterblock titan x
https://www.ekwb.com/shop/ek-fc-titan-x-nickel-original-csq
CPU block
https://www.ekwb.com/shop/ek-supremacy-evo-elite-edition-intel-2011-3

 

[grimfox]

I started speccing a solution based on what you posted initially. Good news is we are on the same page. Unfortunately EK nuked my cart for some reason.

Fittings:
https://www.ekwb.com/shop/fittings/compression-fittings/for-13-19mm-1-2-3-4-tubing

Tubing:
https://www.ekwb.com/shop/accessories/tubing/13-19mm-1-2-3-4-tubing

You'll need 2 fittings for each pump, CPU block, radiator, res, and 2 for the quad connection. Based on 3 pumps and 3 rads and a single res you are looking at 20 fittings. Since you are running 5meters to put the radiator outside you'll need 10meters of tube just for that and say another meter inside the case and one more meter for extra. Depending on the radiators and reservoir you'll probably need at least 2 but probably 3 liters of coolant.