Hi there, I’m running into an issue with the EXPO 1 profile, the memtest86 that I ran has resulted in a fail with 300+ errors. The RAM is in the Motherboard QVL list
The EXPO 1 is supposed to be 6000MT/s 30-36-36-76 1.35V but the RAM configuration shown in memtest shows 6000MT/s 30-36-36-76 1.100V. The problem is that when I check the values on the UEFI it shows 1.35V applied. (Pictures included of both memtest86 and UEFI)
Is the voltage being applied wrong in this case? Should I manually set the EXPO 1 values? Or am I just reading this wrong (i’m new to pcs and trying to troubleshoot this isn’t easy)
I did get a memtest pass on EXPO 2 (5600MT/s 40-40-40-84 1.2V) on base RAM speeds (4800MT/s 40-40-40-77 1.1V) and on a custom timing I made while trying stuff out (32-40-40-86 1.35V)
Thanks so much in advance.
Picture:
https://ibb.co/0RKWBFgk
https://ibb.co/LzdgrTnv
https://ibb.co/nNZJJQLH
Parts:
Teamgroup T-Force Delta RGB 2x16 6000 cl30 FF3D532G6000HC30DC01
MSI PRO B650S WIFI
The EXPO 1 is supposed to be 6000MT/s 30-36-36-76 1.35V but the RAM configuration shown in memtest shows 6000MT/s 30-36-36-76 1.100V. The problem is that when I check the values on the UEFI it shows 1.35V applied. (Pictures included of both memtest86 and UEFI)
Is the voltage being applied wrong in this case? Should I manually set the EXPO 1 values? Or am I just reading this wrong (i’m new to pcs and trying to troubleshoot this isn’t easy)
I did get a memtest pass on EXPO 2 (5600MT/s 40-40-40-84 1.2V) on base RAM speeds (4800MT/s 40-40-40-77 1.1V) and on a custom timing I made while trying stuff out (32-40-40-86 1.35V)
Thanks so much in advance.
Picture:
https://ibb.co/0RKWBFgk
https://ibb.co/LzdgrTnv
https://ibb.co/nNZJJQLH
Parts:
Teamgroup T-Force Delta RGB 2x16 6000 cl30 FF3D532G6000HC30DC01
MSI PRO B650S WIFI