I have some ddr3 from ADATA, these, and they are rated at 1600mhz, with 9-9-9-24, but I cannot get it to run at that.
I have an MSI-e33 H55 mobo, and i don't know if that is the problem, I have my fsb @ 200, and my cpu multiplier 21, and that is rock stable, but when I try to overclock the ram and run intel burn test them my pc crashes. Also my temps seem fine, ~30c idle, and less than 60c after two hours of intel burn test.
Thanks, the rest of my system is as follows;
CPU-g6950 @ 4.2ghz with hyper 212+
RAM-Adata 1600mhz
PSU-Antec Neo Eco 520w
Mobo-MSI-e33
Case-CM 690
GPU-Integrated Intel Graphics
Note: This was my first build, so no previous experience overclocking.
I have an MSI-e33 H55 mobo, and i don't know if that is the problem, I have my fsb @ 200, and my cpu multiplier 21, and that is rock stable, but when I try to overclock the ram and run intel burn test them my pc crashes. Also my temps seem fine, ~30c idle, and less than 60c after two hours of intel burn test.
Thanks, the rest of my system is as follows;
CPU-g6950 @ 4.2ghz with hyper 212+
RAM-Adata 1600mhz
PSU-Antec Neo Eco 520w
Mobo-MSI-e33
Case-CM 690
GPU-Integrated Intel Graphics
Note: This was my first build, so no previous experience overclocking.