What is your Windows Experience Index Score for your SSD

[obamaliar]

I am wondering what your WEI score is for your SSD ? Mine is currently 7.3 with a Patriot Torqx 128 FW 1571

 

[RetiredChief]

Same drive, same FW, same score. I think the Intel G2 gets 7.6
Not seen any score for a raid0 set up.

 

[cjl]

Intel 80GB X25-M G2 - 7.6 (pre-TRIM firmware)

 

[obamaliar]

Intel 80GB X25-M G2 - 7.6 (pre-TRIM firmware)

thats a nice rig ya got there. mine is old a q6600 @ 3.1 8gb cas5 @ 1031mhz. im waiting for the next intel chip (32nm) then i will upgrade

 

[aman0406]

yes, me too is agree with you.there is no banifit to buy core i7.i am also waiting for intel (32mn)core i9 that will be a good choice for me. my canfr is q6600@3.6 board maximus formula ram 1*4 gb 1200 mhz ocz flaxcy power suply tanger 900w g.gard asus eah 4870 cpu cooler silent knife 2 .sound card asus d2x.sound logitech Z-5500 505 Watts 5.1 Speakers keyboard mouse logitech mx 5500.ssd Intel 80GB X25-M G2C1 HDD 500 WD BLACK

 

[RetiredChief]

Intel 80GB X25-M G2 - 7.8 Latest firmware, 02HD, Fresh Install
i5-750, currently stock, GPU = 5770

Noted a post with 2 in raid0 = 7.9 (Max)

 

[obamaliar]

man chief that is smokin fast 😱

 

[chrisgrundy]

5.9 with a patriot ps-100 32 GB

I know, that is low and sad for an SSD, I should ave gone with intel

interestingly enough, it was also 5.9 with a barracuda, according to windows nothing changed

but according to all other benchmark tools i used, performance is about 50% higher

 

[sminlal]

160GB Intel X25-M G2 with 2CV102HD (TRIM-capable) firmware - rating is 7.7.

 

[cythx]

Why is mine only 7.3? I'm running W7 and have the same 32 NM X25-M G2 models as you guys

 

[blackhawk1928]

Intel X25-M G2 80GB MLC SSD=7.7 in Microsoft Windows 7 Home Premium x64 Experience Index Score.

 

[sminlal]

Why is mine only 7.3? I'm running W7 and have the same 32 NM X25-M G2 models as you guys

It may be that your disk controller or drivers are causing a bottleneck somewhere. And don't forget that the 160GB model is slightly faster than the 80GB.

 

[cricex]

When I first got my x25-m back in November of 2009 I was getting a 7.8.

I re-ran the test today and it's now stuck at 5.9. I re-formatted, re-installed windows, updated all firmware, etc.. and it will not budge.. Anyone have any ideas?

 

[sminlal]

Have you configured the motherboard SATA ports as "AHCI"?

 

[cricex]

Have you configured the motherboard SATA ports as "AHCI"?

Yes I did

 

[rattman169]

yeah, that's low considering my WD 640Gb SATA2 HD gets 5.9 in windows experience

 

[sminlal]

Anything suspicious showing in the SMART data for the drive?

 

[Dockland]

I am wondering what your WEI score is for your SSD ? Mine is currently 7.3 with a Patriot Torqx 128 FW 1571

Single disk 7,3 and 2 identical Intel X25M 80GB G2 RAID0 7,9

 

[cricex]

Anything suspicious showing in the SMART data for the drive?

Here is the SMART info from SSD toolbox utility:

 

[Guest]

I got a G,SKil Falcon 128gb (not the falcon II but the first one) and got WEI 5.9

And I just bought a new OCZ Vertex LE 100Gb and my WEI raise to 7.7 !!

I wish to buy another one but wonder when intel will support SSD in RAID-0 while supporting TRIM ??

 

[sminlal]

Here is the SMART info from SSD toolbox utility:http://frank.chazbox.com/files/1/SMARTdata.PNG

Well I don't see anything obvious. My 160GB Intel X25-M G2 drive has a "B8 End-to-end errors" count that I though might show some indication, but it doesn't show in your screenshot.

 

[SilentBob999]

Hi,

I know this tread is old but I think it still a subject that can appreciate 😛

The last test I ran give me 7.7 with my Corsair F90
Its run on a Windows 7 Ultimate 64 bits


First think I want to say, its that with SSD you can get random result, like really random.

The first test I ran after my windows and driver install give me 7.3
I install windows in IDE mode so I activate the ACHI today and after that I drop at 5.9. I panic and check around what can be wrong, reinstalling all kind of driver and play with a lot of setting but still the same thing since 5 minute ago but for no reason except one.

SSD have random performance for 1 good reason.
Its in the writing process. If you lucky the ssd just have to write the data. If you not it will have to do an Erase/Move/Write operation.

Here I got to test done by CrystalDiskMark. Both test have been done in a 10 minutes interval. No reboot. No antivirus active.

TEST 1
Sequential Read : 155.421 MB/s
Sequential Write : 133.640 MB/s
Random Read 512KB : 150.439 MB/s
Random Write 512KB : 133.566 MB/s
Random Read 4KB (QD=1) : 28.191 MB/s [ 6882.6 IOPS]
Random Write 4KB (QD=1) : 77.603 MB/s [ 18946.0 IOPS]
Random Read 4KB (QD=32) : 136.800 MB/s [ 33398.4 IOPS]
Random Write 4KB (QD=32) : 131.669 MB/s [ 32145.7 IOPS]

TEST 2
Sequential Read : 153.054 MB/s
Sequential Write : 52.764 MB/s
Random Read 512KB : 148.129 MB/s
Random Write 512KB : 49.126 MB/s
Random Read 4KB (QD=1) : 20.916 MB/s [ 5106.4 IOPS]
Random Write 4KB (QD=1) : 49.925 MB/s [ 12188.7 IOPS]
Random Read 4KB (QD=32) : 105.839 MB/s [ 25839.6 IOPS]
Random Write 4KB (QD=32) : 46.576 MB/s [ 11371.2 IOPS]


You can also read this source : source

An SSD write operation may also require a NAND erase operation and move data from one NAND block to another. These involve multiple page writes and block-erase operations, which will slow down the SSD write operation even more

Maybe I'm wrong and it slow down for a completly different reason but its weird..

My Config:
Windows 7 Ult 64bits
Intel Core i7 950 3.06@3840Ghz (fresh by Corsair H50)
12GB (3x4GB) DDR3 1333 @640Mhz 9-9-9-21 (3200Mhz Triple channel)
MotherBoard Gigabyte X58A-UD3R [X58 chipset, ICH10R Southbridge] (support SATA3 & USB3)
Ati Radeon HD4850 512Mb (my old card 😀)
Corsair SSD Force 90 (Boot, windows)
WD Caviar Green 2TO (pagefile, user profil, data)

 

[Mfusick]

I will post tomorrow what my score is after I run it..

 

[zmaynard67]

Intel 80GB X25-M G2 - 7.8 Latest firmware, 02HD, Fresh Install
i5-750, currently stock, GPU = 5770

Noted a post with 2 in raid0 = 7.9 (Max)

I'm not sure whats going on with my system right now, and if anyone has any ideas let me know. My intel X-25M 80gb is only getting a 5.9.

Setup:

AsRock Z68 Extreme4 Gen3
Intel i7-2600K
Gskill 8gb
ATI 5870 1gb
Intel X-25M 80gb
3 other storage Seagate drives

I have the HD in Sata3_0 and boot off it.

Did i miss some drivers or firmware? Is there a bios issue?

 

[edlogic]

i am getting 7.8 on everything but the ssd primary hard disk
on that i am getting a 7.7
during backup i noticed the best transfer rate being about 200 MBS

the ssd is a crucial 256 sata III and it should be able to run faster

i need to find a program that tells me what sata hardware version is in this box

OS Name Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
System Manufacturer Alienware
System Model Area 51
System Type x64-based PC
Processor Intel(R) Core(TM) i7 CPU X980 @ 3.33GHz, 3334 Mhz, 6 Core(s), 12 Logical Processor(s)