So I installed new Corsair ddr4 3000mhz ram and I'm curious about if there's anything to setup or change in the bios. Do I have change something in the bios, like voltages or ram speed to a specific value? I went into the bios before to turn on xmp 1, and on modded Arma 3 I got frequent crashes, In comparison to ram speed set on default, which caused way less frequent crashes.
Specs:
Computer: MSI MS-7B07
CPU: AMD Ryzen 5 2600 (Pinnacle Ridge, PiR-B2)
3400 MHz (34.00x100.0) @ 3899 MHz (39.00x100.0)
Motherboard: MSI A320M PRO-VH PLUS (MS-7B07)
BIOS: 3.E0, 01/22/2019
Chipset: AMD A320 (Promontory)
Memory: 16384 MBytes @ 1066 MHz, 15-15-15-36
NVIDIA GeForce GTX 1060 6GB, 6144 MB GDDR5 SDRAM
Drive: ADATA SU655, 117.2 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: TOSHIBA HDWD110, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: ADATA SU800, 500.1 GB, Serial ATA 6Gb/s @ 6Gb/s <-> USB
Sound: NVIDIA GP106 - High Definition Audio Controller
Specs:
Computer: MSI MS-7B07
CPU: AMD Ryzen 5 2600 (Pinnacle Ridge, PiR-B2)
3400 MHz (34.00x100.0) @ 3899 MHz (39.00x100.0)
Motherboard: MSI A320M PRO-VH PLUS (MS-7B07)
BIOS: 3.E0, 01/22/2019
Chipset: AMD A320 (Promontory)
Memory: 16384 MBytes @ 1066 MHz, 15-15-15-36
- 8192 MB PC23900 DDR4 SDRAM - Corsair CMK16GX4M2B3000C15
- 8192 MB PC23900 DDR4 SDRAM - Corsair CMK16GX4M2B3000C15
NVIDIA GeForce GTX 1060 6GB, 6144 MB GDDR5 SDRAM
Drive: ADATA SU655, 117.2 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: TOSHIBA HDWD110, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: ADATA SU800, 500.1 GB, Serial ATA 6Gb/s @ 6Gb/s <-> USB
Sound: NVIDIA GP106 - High Definition Audio Controller