Question When I put two RAMs, the display was not showing at that time. However, when I put one RAM again, the display was shown again.

[i_alex5]

When I put two RAMs, the display was not showing at that time. However, when I put one RAM again, the display was shown again. Despite checking the 4 RAM slots and both RAMs, those are working fine. The problem arises when installing two RAMs.
And Now the PC just shutting down and restarting by itself endlessly until I turn it off.

It happened suddenly. Everything was fine until yesterday. It was functioning until yesterday.

Motherboard : Gigabyte G1 Sniper B7
BIOS : F22f (Up to date)
RAM : Patriot Memory Signature Premium DDR4 8GB 3200MHz (2x8GB)
OS : Windows 10 21H2

 

[rickypicky5]

What slots are you installing the 2 modules into? According to your motherboad's manual, you need to install in either slots 2 and 1, or slots 4 and 3. Looking down at your motherboard, with the RAM slots on your upper right, they are numbered, from left to right, 4, 2, 3, 1.

 

[i_alex5]

What slots are you installing the 2 modules into? According to your motherboad's manual, you need to install in either slots 2 and 1, or slots 4 and 3. Looking down at your motherboard, with the RAM slots on your upper right, they are numbered, from left to right, 4, 2, 3, 1.

Yeah its installed in slots 2 and 1. But no luck

 

[rickypicky5]

Have you run MemTest86 from a self-booting USB drive with both of your RAMs installed?