Which Case??

[K1ash3r]

Guys Im not sure which case I should buy

http://www.ebuyer.com/search?page=1&store=2&cat=23&subcat=418
http://www.ebuyer.com/search?page=2&store=2&cat=23&subcat=418&sort=pricelow&limit=10
http://www.ebuyer.com/search?page=3&store=2&cat=23&subcat=418&sort=pricelow&limit=10
http://www.ebuyer.com/search?page=4&store=2&cat=23&subcat=418&sort=pricelow&limit=10
http://www.ebuyer.com/search?page=5&store=2&cat=23&subcat=418&sort=pricelow&limit=10

Using the the cases listed in the above links can you guys recommend me the "top 5 cases"(meaning quality, cooling etc.)

Im looking for a case no more than 34 pounds. The case will be for the following built

http://www.ebuyer.com/product/168971
http://www.ebuyer.com/product/170014
http://www.ebuyer.com/product/129177
http://www.ebuyer.com/product/150985
http://www.ebuyer.com/product/167128
http://www.ebuyer.com/product/128708
http://www.ebuyer.com/product/152940

Any comments on the built also welcomed (its a budget built and i dont want to go over 300 pounds)

 

[nofun]

Anything from Antec or Cooler Master will be of decent quality (and they both make economy models). Other brands make some good cases in that price range too. For information about a particular case, just google the case name followed by "review"

This Antec 200 would not be a bad option for you:
http://www.ebuyer.com/product/168615

 

[K1ash3r]

I was thinking this one

http://www.ebuyer.com/product/150298

the reviews are pretty good altough its a coolermaster or antec
Im also trying to keep the price under 30 pounds typo^^

 

[K1ash3r]

Antec 300 is a great buy at $55 here in the US.

yea why dont i just get one for 300$ -.- it has to be less than 30 pounds, why dont u take the time to read my post properly and i wouldnt have to repeat my self, let try that, shall we.

 

[restorick]

yea why dont i just get one for 300$ -.- it has to be less than 30 pounds, why dont u take the time to read my post properly and i wouldnt have to repeat my self, let try that, shall we.

Perhaps you should lose the attitude and check your money conversion rates. Your original post mentioned 34 pounds, which translates to approx $65 US.

You can certainly find Antec in the UK. The Antec 300 is a model number, not a price.

Reading comprehension is your friend. So is Google.

Rick

 

[nofun]

@Zipzoomflyhigh: Yeah, with the exchange rate (34 pounds = ~$55) the Antec 300 would be in his price range, unfortunately components just cost more in England (even with the exchange rate). The Antec 300 runs about 40 pounds over there.

yea why dont i just get one for 300$ -.- it has to be less than 30 pounds, why dont u take the time to read my post properly and i wouldnt have to repeat my self, let try that, shall we.

@OP:
Dude, don't come here and post links to every case in creation and then say: "HEY! WHICH ONE SHOULD I CHOOSE?" and then jump down our throats when we offer up our advice. It's not our fault you didn't budget properly for a case. A case is no less important than any other component.

That being said, The Sunbeam you linked looks like a decent choice for the money.

 

[K1ash3r]

Perhaps you should lose the attitude and check your money conversion rates. Your original post mentioned 34 pounds, which translates to approx $65 US.

You can certainly find Antec in the UK. The Antec 300 is a model number, not a price.

Reading comprehension is your friend. So is Google.

Rick

Its not all about conversion rates unfortuntly antec 300 is 40 pounds. Did I say anything about antec 300 being 300$?

 

[K1ash3r]

@Zipzoomflyhigh: Yeah, with the exchange rate (34 pounds = ~$55) the Antec 300 would be in his price range, unfortunately components just cost more in England (even with the exchange rate). The Antec 300 runs about 40 pounds over there.



@OP:
Dude, don't come here and post links to every case in creation and then say: "HEY! WHICH ONE SHOULD I CHOOSE?" and then jump down our throats when we offer up our advice. It's not our fault you didn't budget properly for a case. A case is no less important than any other component.

That being said, The Sunbeam you linked looks like a decent choice for the money.

I dun know where u comin from cause i only posted 4 links, thanks for the reply tho

 

[restorick]

Its not all about conversion rates unfortuntly antec 300 is 40 pounds. Did I say anything about antec 300 being 300$?

Do you actually check what you post BEFORE you post it? Or, is English your second language?

Review what you posted before firing off nonsense.

BTW - you posted 7 links to specific cases, and 5 links to categories. See your original post.

Good luck with your build.

 

[K1ash3r]

Do you actually check what you post BEFORE you post it? Or, is English your second language?

Review what you posted before firing off nonsense.

BTW - you posted 7 links to specific cases, and 5 links to categories. See your original post.

Good luck with your build.

umm, dude I dont really dont know what you're talking about cause like you said iv posted 5 links with a list of cases on each link, but the 7 links you are refering to are my actual built and yes english is my second language if you were wondering