As said in the title i am building a new pc. My system is able to POST and get to the mobo software. I am able to see all other components recognized. I created a usb of windows 10 using the windows media creation tool. When i boot to the usb to try and install i see the first window that ask you to choose a language. Once i start clicking button on my keyboard it will continue for like 5-7 secs and proceed to black out my display and initiates the boot to the usb again.
I have removed/replaced the heatsink to the CPU. Says 30 C on the mobo software. https://m.imgur.com/gallery/oPsYsK1
I did try just leaving the initial window during the install without clicking any keys and it stayed alive for more than 10 seconds. As soon as i type it will restart. Keyboard and mouse also work fine in the mobo software interface and for however far i can get through the install.
Below is my build:
mobo - aorus pro z390
cpu - i5 9600k
gpu - N/A still on its way
psu - corsair cx 750 m
ram - 2 x 8gb corsair vengeance lpx 2400 mhz
cpu fan - enermax (not sure the model at the moment) runs fine though from what i can see
I have removed/replaced the heatsink to the CPU. Says 30 C on the mobo software. https://m.imgur.com/gallery/oPsYsK1
I did try just leaving the initial window during the install without clicking any keys and it stayed alive for more than 10 seconds. As soon as i type it will restart. Keyboard and mouse also work fine in the mobo software interface and for however far i can get through the install.
Below is my build:
mobo - aorus pro z390
cpu - i5 9600k
gpu - N/A still on its way
psu - corsair cx 750 m
ram - 2 x 8gb corsair vengeance lpx 2400 mhz
cpu fan - enermax (not sure the model at the moment) runs fine though from what i can see