I have an ASUS ZenWiFi AX6600 Tri-Band Mesh.
For trouble shooting I have reset all mesh points to factory. And then only set up one main router at a time. removes the Mesh from the system all together. I have also used two different mesh routers as the main router, for trouble shooting. Rules out just the one router being bad.
Problem- Wirelessly my laptops and XBOX , desktops, TV... have difficulty connecting to the wireless router. When they do connect my download speeds are under 10 mb and my upload speeds are in the 100s. When physically connected to the router my speeds are up and down 900+ .
Distance from the router, for trouble shooting devices are within 6 ft.
I am at a loss. I have gone through all wireless settings, not sure what I could be missing. I have turn off or on or adjusted each of these then went back to default before moving to the next.
I have attempted to use only 2ghz or 5ghz
have disabled the WiFi6 mode
Disabled 11b
WiFI Agile Multiband has remained disabled.
Targetr Wake time is disabled
Authentication I have tried WPA2-personal, WPA, open system, WPA3
WPA encrypting is AES, can not change this.
Protected Management Frames are disabled, tried capable, and required, before going back to disabled
Channel bandwith on 2ghz tried 20/40, 20 and 40. on 5ghz tried 20, 40, 80 and the 20/40./80 option
I do not have QOS turned on
I have not looked into the WAN settings or other lan settings, since hard wired connection is fast, I would not think anything like a DNS or other WAN setting could be the issue.
I do have the latest firmware on the routers and all my computer are updated. The fact that it is XBOX, Laptop, Surface , work laptop, TVs seems to be a WiFI issue.
Oh I will add my Iphones and Ipads always seem to be fast with no issue.
Would like to see if I am missing anything before sending these routers to the trash and being out the money (had them to long to return) Did not realize the issue I was having.
For trouble shooting I have reset all mesh points to factory. And then only set up one main router at a time. removes the Mesh from the system all together. I have also used two different mesh routers as the main router, for trouble shooting. Rules out just the one router being bad.
Problem- Wirelessly my laptops and XBOX , desktops, TV... have difficulty connecting to the wireless router. When they do connect my download speeds are under 10 mb and my upload speeds are in the 100s. When physically connected to the router my speeds are up and down 900+ .
Distance from the router, for trouble shooting devices are within 6 ft.
I am at a loss. I have gone through all wireless settings, not sure what I could be missing. I have turn off or on or adjusted each of these then went back to default before moving to the next.
I have attempted to use only 2ghz or 5ghz
have disabled the WiFi6 mode
Disabled 11b
WiFI Agile Multiband has remained disabled.
Targetr Wake time is disabled
Authentication I have tried WPA2-personal, WPA, open system, WPA3
WPA encrypting is AES, can not change this.
Protected Management Frames are disabled, tried capable, and required, before going back to disabled
Channel bandwith on 2ghz tried 20/40, 20 and 40. on 5ghz tried 20, 40, 80 and the 20/40./80 option
I do not have QOS turned on
I have not looked into the WAN settings or other lan settings, since hard wired connection is fast, I would not think anything like a DNS or other WAN setting could be the issue.
I do have the latest firmware on the routers and all my computer are updated. The fact that it is XBOX, Laptop, Surface , work laptop, TVs seems to be a WiFI issue.
Oh I will add my Iphones and Ipads always seem to be fast with no issue.
Would like to see if I am missing anything before sending these routers to the trash and being out the money (had them to long to return) Did not realize the issue I was having.