[SOLVED] Will a Cooler Master Hyper 212 Turbo fit?

[Ketx]

I have a gigabyte a320m-S2H motherboard with 2x8gb ram, will this cooler fit?

 

[Ketx]

I mean, is there enough space between the cooler and memory / gpu

 

[Deleted member 2720853]

Give us full specs including chassis and case fan setup.

 

[Ketx]

Give us full specs including chassis and case fan setup.

Aerocool Cylon RGB LED MID Tower ATX
Ryzen 5 2600x
Gigabyte A320M-S2H
2x Kingston HyperX FURY 8GB 2400Mhz DDR4
Asus GTX 1060 6gb Expedition
1 120MM fan in the back
2 120MM fan below

 

[Phaaze88]

That's a big negative: https://www.aerocool.us/pgs/pgs-v/cylon.html
Up to 155mm - I'd say 154mm to be on the safe side.

The 212 Turbo is 160mm.

 

[Ketx]

Oof, what decent air cooler do you recommend?

 

[Ketx]

That's a big negative: https://www.aerocool.us/pgs/pgs-v/cylon.html
Up to 155mm - I'd say 154mm to be on the safe side.

The 212 Turbo is 160mm.

I mean it does fit with the case open, but would it block the ram sockets?

 

[Deleted member 2720853]

I mean it does fit with the case open, but would it block the ram sockets?

Look into the Noctua NH-C14S.

 

[Phaaze88]

Thermalright Macho 120 SBM
NH-C14S
Scythe Mugen 5 Rev. B
Deepcool Gammaxx GT or Gammaxx 400

I mean it does fit with the case open, but would it block the ram sockets?

Well, yeah... if you're okay with leaving the side panel off?

 

[Ketx]

Thermalright Macho 120 SBM
NH-C14S
Scythe Mugen 5 Rev. B
Deepcool Gammaxx GT or Gammaxx 400


Well, yeah... if you're okay with leaving the side panel off?

So it does fit.. but thats a big negative side, so i will do some research with these ones you said

 

[Ketx]

Thermalright Macho 120 SBM
NH-C14S
Scythe Mugen 5 Rev. B
Deepcool Gammaxx GT or Gammaxx 400


Well, yeah... if you're okay with leaving the side panel off?

Will a Scythe Mugen 5 Rgb Edition

Fit with this motherboard? i just want to know if theres enough space between the cpu and ram sockets. It has 154.5mm so it will fit in the case

I don't want to lose a socket or 2 because it's too big, or is that not even a possibility?

 

[Ketx]

The motherboard Gigabyte A320M-S2H is very small

 

[Phaaze88]

Will a Scythe Mugen 5 Rgb Edition

Fit with this motherboard? i just want to know if theres enough space between the cpu and ram sockets. It has 154.5mm so it will fit in the case

I don't want to lose a socket or 2 because it's too big, or is that not even a possibility?

Oh darn it! Partpicker said it was 154mm. Still to close for comfort - scratch that then.

The motherboard Gigabyte A320M-S2H is very small

That's got nothing to do with it. The socket is still AM4.

 

[Ketx]

Oh darn it! Partpicker said it was 154mm. Still to close for comfort - scratch that then.


That's got nothing to do with it. The socket is still AM4.

I know i know, what i want to know is, if the cooler fan or heatsink will block the only 2 ddr4 sockets the motherboard has, since it's quite large

 

[Ketx]

Oh darn it! Partpicker said it was 154mm. Still to close for comfort - scratch that then.


That's got nothing to do with it. The socket is still AM4.

It might just barely fit i guess regarding the case glass window

 

[Phaaze88]

I know i know, what i want to know is, if the cooler fan or heatsink will block the only 2 ddr4 sockets the motherboard has, since it's quite large

They've 'tilted' the heatsink far back enough that the fan should sit right in front of the ram.

 

[Ketx]

Thermalright Macho 120 SBM
NH-C14S
Scythe Mugen 5 Rev. B
Deepcool Gammaxx GT or Gammaxx 400


Well, yeah... if you're okay with leaving the side panel off?

Mostly of these are 154 or higher

 

[Phaaze88]

Macho 120 SBM, 150mm: http://thermalright.com/product/macho120-sbm/
NH-C14S, 115 or 142mm, depending on which side the fan is mounted: https://noctua.at/en/nh-c14s/specification
Mugen 5 Rev. B - same as the RGB version: already addressed that one.
Deepcool Gammaxx GT: I really slipped up on this one. Sorry! How'd I even come across it in the first place...
Deepcool Gammaxx 400: Screwed up again, I see. I'll have to not rely on partpicker for exact measurements - but some manufacturers don't do it either, especially Cooler Master...

 

[Ketx]

Macho 120 SBM, 150mm: http://thermalright.com/product/macho120-sbm/
NH-C14S, 115 or 142mm, depending on which side the fan is mounted: https://noctua.at/en/nh-c14s/specification
Mugen 5 Rev. B - same as the RGB version: already addressed that one.
Deepcool Gammaxx GT: I really slipped up on this one. Sorry! How'd I even come across it in the first place...
Deepcool Gammaxx 400: Screwed up again, I see. I'll have to not rely on partpicker for exact measurements - but some manufacturers don't do it either, especially Cooler Master...

Sadly i can only find deepcool, cooler master and scythe models where i live, any more recommendations?

 

[Phaaze88]

Ok, only Deepcool, Cooler Master, and Scythe? Ok, give me a moment...

 

[Ketx]

I'm thinking about getting the scythe Mugen 5 rgb edition it should barely fit with the 154.5mm ?

 

[Phaaze88]

Scythe:
Big Shuriken 3
Kotetsu Mark II

Cooler Master:
Hyper T4

Deepcool doesn't appear to have anything decent in those sizes.

 

[Ketx]

Scythe:
Big Shuriken 3
Kotetsu Mark II

Cooler Master:
Hyper T4

Deepcool doesn't appear to have anything decent in those sizes.

I will look into that Hyper

 

[Ketx]

Scythe:
Big Shuriken 3
Kotetsu Mark II

Cooler Master:
Hyper T4

Deepcool doesn't appear to have anything decent in those sizes.

Thanks i think i will go with the Hyper!

 

[Phaaze88]

You're welcome!