Will these cable combs fit my Paracord sleeved PSU cables?

[Ferrariassassin]

I want to buy them from performance-pcs.com but they ask me to pick Size A, B, or C yet does not say what size each is. I have an EVGA SuperNova 750 B1 and i custom sleeved my 24 pin and two 8 pin with 550 Paracord as the image below shows. SO which Size/letter should i choose on the website that will fit my 24 pin and two 8 pin cables? Sorry if this is a stupid question but i just do not want to buy the wrong size and i can not get an email reply or live support reply from them. Here is the ones i want. Also will the 8+8 Slot - (Side by Side Dual VGA) be better to get than two separate 8 pin combs?

http://www.performance-pcs.com/cablemod-cable-combs-4-28-slot-clear.html

http://imgur.com/onwWvou

 

[Darkbreeze]

Yes, they'll fit. You might like some of these better though. I think they are better quality and variety.

https://mainframecustom.com/product-category/cable-management/

 

[Ferrariassassin]

Yes, they'll fit. You might like some of these better though. I think they are better quality and variety.

https://mainframecustom.com/product-category/cable-management/

Those are nice but i really do not want to take apart all of my cables one by one than put them all through the comb than back together. SO what size would fit mine? A, B, or C?

 

[Darkbreeze]

What size is your paracord, and is it coreless, or did you remove the core yourself, OR, are they presleeved cables or extensions?

 

[Darkbreeze]

You can find answers to most of your sleeving questions here: http://www.overclock.net/t/1262900/frequently-asked-sleeving-questions


But if you have standard Military grade paracord sleeving, type 550, then mostly it will be a 4mm external diameter. Some cheaper types of paracord might be as small as 3mm but by the time you fill them with wire, mostly 4mm should work fine. If you are still uncertain, shoot them an email at Performance PCs. They know what they are about and can get you the answer you are looking for regarding the products they sell.

 

[Bearmann]

Yes, they'll fit. You might like some of these better though. I think they are better quality and variety.

https://mainframecustom.com/product-category/cable-management/

Those are nice but i really do not want to take apart all of my cables one by one than put them all through the comb than back together. SO what size would fit mine? A, B, or C?

Not that I know anything about them, but the E22's did not require taking apart the cables.

 

[Ferrariassassin]

What size is your paracord, and is it coreless, or did you remove the core yourself, OR, are they presleeved cables or extensions?

Thanks for your help man. I did use 550 Paracord and gutted it because you can not fit the cables in the Paracord if the guts are in it. The image below is that it looks like, did i do ok? It is my first time EVER doing this and God did i burn my fingers like crazy due to melting the Paracord and squishing it around the pin so it can fit under the connector neat because Heat shrink ruins it and is butt ugly.

http://imgur.com/m4FHCmk

 

[Ferrariassassin]

Yes, they'll fit. You might like some of these better though. I think they are better quality and variety.

https://mainframecustom.com/product-category/cable-management/

Those are nice but i really do not want to take apart all of my cables one by one than put them all through the comb than back together. SO what size would fit mine? A, B, or C?

Not that I know anything about them, but the E22's did not require taking apart the cables.

Oh sorry i did not see those i thought they were the same as the Pistol Cylinder looking ones.

 

[Darkbreeze]

Hard to tell for sure due to the lighting, but from what I can see, it looks good. I would think that if you want to go with the ones you were looking at, you would probably want to use size C which is 4mm. It's really not an exact science, as there can be differences in paracord thickness and weave from one manufacturer to another, but if it's military grade paracord then it should be 4mm which is type C.

 

[Ferrariassassin]

Hard to tell for sure due to the lighting, but from what I can see, it looks good. I would think that if you want to go with the ones you were looking at, you would probably want to use size C which is 4mm. It's really not an exact science, as there can be differences in paracord thickness and weave from one manufacturer to another, but if it's military grade paracord then it should be 4mm which is type C.

Ok thanks. And here is one with no lights.

http://imgur.com/wde1CuM

 

[Darkbreeze]

Yeah, that's a nice job.