[SOLVED] Window 10 scanning and repairing C drive randomly

[RachokingzOz]

This popped up randomly as I was turning on my computer. I have already tried to fix it from window 10 within the tool section under the property. I believe it is called error checking. I even did this process like 4 times. It will give me the message twice and boot into windows again, so for the most part my computer works. But just wondering why it shows a message like this.

 

[SkyNetRising]

But just wondering why it shows a message like this.

Checkdisk on boot is being run, if volume dirty bit is set.
This gets triggered, if you didn't shut down pc properly before - by cutting power or pressing reset button.

 

[RachokingzOz]

Checkdisk on boot is being run, if volume dirty bit is set.
This gets triggered, if you didn't shut down pc properly before - by cutting power or pressing reset button.

I had a power outage a while ago, so this might be the cause? It seems that turning off fast startup gets rid of the message. But how do get a permanent fix.

 

[SkyNetRising]

I had a power outage a while ago, so this might be the cause?

Yes.
If power outage happened while your pc was on, then that's instant power off without a proper shutdown.

 

[RachokingzOz]

Yes.
If power outage happened while your pc was on, then that's instant power off without a proper shutdown.

So how do I fix this? I have already used the window 10 scan tool and it doesn't seem to work.

 

[SkyNetRising]

So how do I fix this? I have already used the window 10 scan tool and it doesn't seem to work.

Don't turn off your pc without a proper shutdown.
You may also want to disable fast boot in BIOS and
fast startup in windows settings.