So, I recently built a new PC with a:
Ryzen 7 2700X
RX 580 8 GB
Aorus B450 Pro
16GB HyperX Predator
250GB Samsung 970 Evo Plus
2TB BarraCuda 2016
And a temporary Be Quiet! E5-550W PSU (I bought an EVGA 650W Bronze which had some weird sounds so I sent it back)
I get the 0xc0000428 error everytime I turn off the PSU after shutting down. I have to mention that everytime I manage to get into Bios after the error shows up, the Windows boots and works perfectly fine. Anyone has any idea why this is happening? Thanks a lot!! 😁
*Also, when I turn the PSU off and on again, the lights on the MB flash for a second.
**PROBLEM SOLVED WITH A BIOS RESET, seems like the problem asa the XMP profile for the RAM. Altough it crashes with XMP @3200MHz, it works when I set it through Gigabyte's EasyTune @3200MHz without turning on XMP.
Thanks all for your help!!😁
Ryzen 7 2700X
RX 580 8 GB
Aorus B450 Pro
16GB HyperX Predator
250GB Samsung 970 Evo Plus
2TB BarraCuda 2016
And a temporary Be Quiet! E5-550W PSU (I bought an EVGA 650W Bronze which had some weird sounds so I sent it back)
I get the 0xc0000428 error everytime I turn off the PSU after shutting down. I have to mention that everytime I manage to get into Bios after the error shows up, the Windows boots and works perfectly fine. Anyone has any idea why this is happening? Thanks a lot!! 😁
*Also, when I turn the PSU off and on again, the lights on the MB flash for a second.
**PROBLEM SOLVED WITH A BIOS RESET, seems like the problem asa the XMP profile for the RAM. Altough it crashes with XMP @3200MHz, it works when I set it through Gigabyte's EasyTune @3200MHz without turning on XMP.
Thanks all for your help!!😁
Last edited: