[SOLVED] windows 10 corrupted immediately after installation

[Rockykill1919]

Hello everyone,

A few days ago my system started to glitch a bit so i reinstalled windows but the problem continued, even with different USB installation media from different PCs. I found out that while in the installation process of windows it already is glitching.

Once I'm in Windows basically every program that I open almost immediately closes and I cant do anything about it.

Does anyone have this problem as well and can anyone help me.

Thanks in advance



Specs:

Ryzen 5 3600

Gigabyte b550 gaming x V2

16 gb trident z RGB 3600mhz cl18

Asus GTX 750ti oc 2gb

 

[Deleted member 14196]

how did you reinstall windows? what process did you use? where did you get windows install media from? did you use the Media Creation Tool to make the bootable USB that installs windows?

 

[Rockykill1919]

how did you reinstall windows? what process did you use? where did you get windows install media from? did you use the Media Creation Tool to make the bootable USB that installs windows?

I used a USB stick for reinstalling windows and I out windows on there with the media creation tool.
Don't really know process I can do different.

 

[Deleted member 14196]

did you delete all the partitions and then create a new one, then install? because that is the proper way to do a clean install.

if that doesn't work, you have other issues. you may even be infected

 

[Rockykill1919]

did you delete all the partitions and then create a new one, then install? because that is the proper way to do a clean install.

if that doesn't work, you have other issues. you may even be infected

I deleted and formatted every partition that was in my system.
I also let the install itself create the partitions.

 

[Deleted member 14196]

Maybe you should pull the drivers out and test them on another PC see if there’s a problem with the drives also used Memtest86 and test your memory

 

[Blackink]

I was thinking the hard drives(s) might be failing.

 

[Rockykill1919]

I was thinking the hard drives(s) might be failing.

I dont think it's my hard drives tho,
I tried 3 different drives 2 HDD and 1 SSD and all of them had the same problem

 

[Colif]

I found out that while in the installation process of windows it already is glitching.

what stage of the install? Before or after choosing drive? before or after 1st restart?

Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors.
Memtest is created as a bootable USB so that you don’t need windows to run it, just one to make it.

Try testing CPU -
Prime 95 bootable - https://www.infopackets.com/news/10113/how-fix-bootable-prime95-stress-test-hardware

Prime 95 how to Guide: http://www.playtool.com/pages/prime95/prime95.html

 

[Rockykill1919]

what stage of the install? Before or after choosing drive? before or after 1st restart?

Try running memtest86 on each of your ram sticks, one stick at a time, up to 4 passes. Only error count you want is 0, any higher could be cause of the BSOD. Remove/replace ram sticks with errors.
Memtest is created as a bootable USB so that you don’t need windows to run it, just one to make it.

Try testing CPU -
Prime 95 bootable - https://www.infopackets.com/news/10113/how-fix-bootable-prime95-stress-test-hardware

Prime 95 how to Guide: http://www.playtool.com/pages/prime95/prime95.html

The glitching starts when I can choose what region I'm from.
Also I don't get bsod, it just glitches and closes programs

 

[Colif]

ok. at that stage of the install its running off a ram drive. No ssd or hdd are involved until after 1st restart. SO that reduce probable causes...

try the 2 tests and see what results are.

 

[Rockykill1919]

ok. at that stage of the install its running off a ram drive. No ssd or hdd are involved until after 1st restart. SO that reduce probable causes...

try the 2 tests and see what results are.

I tried it with the ram kit of a friend and it had the same results so i don't think it's my ram

 

[Colif]

okay, try running this

edit: notices I already suggested prime... still needs to be done.

another option is its the USB you trying to install off, try using another one?