Question Windows 10 - Unable to Boot Fresh/Update 20H2 via windows Update

[vivs]

Been trying multiple times for reinstalling new windows 22H2 or some recent versions - Nothing happens. What I've tried soo far
--Updating from windows update ( to 20H2 ) It fails every time
--Tried creating Bootable file 2 different Pen Drives , selected Bootable device as Pen drive & tried, but it shows a blurry display & starts boot loop again ( Error - oxC1900101 - 0x20017 The installation Failed in the SAFE_OS phase with an error during BOOT operation).
--Removed SSD on which windows is installed & booted , but again same boot loop.


Current Windows 10 Info ( from winver --Version 1607 ( OS Build 14393.2906)

Plaese help i am fed up

 

[JeffreyP55]

Been trying multiple times for reinstalling new windows 20H2 or some recent versions - Nothing happens. What I've tried soo far
--Updating from windows update ( to 20H2 ) It fails every time
--Tried creating Bootable file 2 different Pen Drives , selected Bootable device as Pen drive & tried, but it shows a blurry display & starts boot loop again ( Error - oxC1900101 - 0x20017 The installation Failed in the SAFE_OS phase with an error during BOOT operation).
--Removed SSD on which windows is installed & booted , but again same boot loop.


Current Windows 10 Info ( from winver --Version 1607 ( OS Build 14393.2906)

Plaese help i am fed up

20H2 is not an update. 22H2 is.

 

[vivs]

20H2 is not an update. 22H2 is.

Solution to this ?? @JeffreyP55

 

[JeffreyP55]

Solution to this ?? @JeffreyP55

Suggestion. You are not having not very much luck so far and I have no idea how you setup your PC.
Couldn't hurt,

 

[ex_bubblehead]

This is a common problem. One of the solutions at the provided link may help:
https://www.minitool.com/backup-tips/0xc1900101.html

 

[vivs]

Ok how about this error while reinstalling --
It can boot in UEFI MODE ONLY but you are trying to boot in bios /legacy mode . This will not work

 

[ex_bubblehead]

Why are you trying to boot in legacy mode?

If your system drive is formatted GPT then UEFI mode is required.

If your USB installer was created in UEFI mode then legacy mode boot is never going to work.

 

[vivs]

Why are you trying to boot in legacy mode?

If your system drive is formatted GPT then UEFI mode is required.

If your USB installer was created in UEFI mode then legacy mode boot is never going to work.

I haven't changed anything in bios / changed boot to uefi only , still get the same error . How do i get out of that legacy boot ? Also my screen now is just showing boot screen & then bam ! Blank