Windows 10 wont boot from ssd

[itstopsecret]

i got an ssd (intel 600p 512gb) a few months ago and just finally got around to setting it up as my boot drive. I have gotten it to work a couple of times but both times that I have it has stopped working randomly. I still have the hard drive that it was on too and it wont work on that either. It gives me an error message like this:

Inte(R) Boot Agent CL v0.1.10
Copyright (C) 1997-2013, Intel Corporation

PXE-E61: Media test failure, check cable
PXE: Exiting Intel Boot Agent.

Reboot and select proper Boot device
or insert boot media in selected boot device and press a key.

System specs:
gigabyte GA-Z270m-D3H
i5 7600k
Rosewill photon 750w modular psu
xfx r9 380 2gb
intel 600p 512gb
WD blue 1tb
16gb G skill ripjaws V ddr4 2666

any suggestions would be appreciated

 

[USAFRet]

PXE indicates that the BIOS is attempting to boot from a network resource. Which is obviously not correct.

Go into the BIOS and alter the boot priority as needed.

 

[itstopsecret]

PXE indicates that the BIOS is attempting to boot from a network resource. Which is obviously not correct.

Go into the BIOS and alter the boot priority as needed.

i did this and now its just giving me the "reboot and select proper boot device" message

 

[USAFRet]

PXE indicates that the BIOS is attempting to boot from a network resource. Which is obviously not correct.

Go into the BIOS and alter the boot priority as needed.

i did this and now its just giving me the "reboot and select proper boot device" message

"i did this"

Did what, exactly?

 

[itstopsecret]

PXE indicates that the BIOS is attempting to boot from a network resource. Which is obviously not correct.

Go into the BIOS and alter the boot priority as needed.

i did this and now its just giving me the "reboot and select proper boot device" message

"i did this"

Did what, exactly?

altered the boot priority, i got it working now though thanks for the help, only other issue is that now every time i boot it asks me if i want to boot from windows 10 on volume 9 or windows 10 on volume 4

 

[USAFRet]

altered the boot priority, i got it working now though thanks for the help, only other issue is that now every time i boot it asks me if i want to boot from windows 10 on volume 9 or windows 10 on volume 4

It is seeing that you have 2 active boot partitions on 2 different drives.
EasyBCD can probably fix that
https://neosmart.net/EasyBCD/