Hello, I'm always getting a BSOD when trying to boot Windows with more than 2 modules of my newly purchased ram. When I runned the MemTest86 test for each module, I had no errors. I also got no errors when testing with two memories, but when i try with 3 modules, i start getting errors, the same goes for 4 modules.
All the modules are Always recognized by the BIOS.
Other troubleshooting steps I have done:
Full PC Specs:
Memory: 2x HYPERX FURY 4GB 2666MHZ 8 DDR4 CL15 BLACK - HX426C15FB/4 (trying with 4)
PSU: EVGA 600W 80 PLUS WHITE (also tried a Wisecase 750W)
CPU: AMD RYZEN 5 2600X 3.6GHZ
Motherboard: MSI B450M BAZOOKA
OS: Windows 10 Education x64
GPU: GT 520 1GB
Do you guys have any suggestions what else can I try?
All the modules are Always recognized by the BIOS.
Other troubleshooting steps I have done:
- Temperatures are fine
- Using a different PSU
- Using onboard GPU
- BIOS reset
- Swapping around RAM modules
Full PC Specs:
Memory: 2x HYPERX FURY 4GB 2666MHZ 8 DDR4 CL15 BLACK - HX426C15FB/4 (trying with 4)
PSU: EVGA 600W 80 PLUS WHITE (also tried a Wisecase 750W)
CPU: AMD RYZEN 5 2600X 3.6GHZ
Motherboard: MSI B450M BAZOOKA
OS: Windows 10 Education x64
GPU: GT 520 1GB
Do you guys have any suggestions what else can I try?
Facebook
Twitter
Instagram