I received the CPU and did what you guys told me, everything works perfectly. There was no need to cut the socket or add a sticker on the CPU pins, the CPU i received already had custom gaps to fit in a LGA775 and had the sticker on.
Thank you guys for the instructions, one funny thing is that my Motherboard was actually a P26, not a P28 xD, don't know how i mixed that up since the model name is displayed on every boot xD.
Only problem i have right now i overclocking it, in the BIOS it says base clock: 333MHz and ratio: x9.0.
When I set the base clock higher for example to 350MHz meaning the CPU would run at 3.15GHz, I save the changes and restart and after that the PC doesn't work, just coolers spinning and i have to clear the CMOS for it to work again on stock.
Some people say that the problem is the C0 stepping, it wasn't good for overclocking, I don't have a lot of knowledge on that field, i have tried a couple of tutorials, but mostly nothing works since they are meant for different motherboards.
If you guys have any suggestions please tell me, the overclock is not that important, but if there is a way I'd definitely would like do have it
. Thanks again.