[SOLVED] XMP not working

[ZeP1999]

So i have a ryzen 1600x, msi b350 tomahawk artic and my rams are 16gb of tryzent z 3200mhz cl16 (f4-3200c16d-16gtzkw)

I activated the 3200mhz XMP profile and save and reboot. But just nothing happens, I keep my ram at 2133mhz and if i open the bios it says that the xmp profile is active. also tried to set manually the speed and timings with a preset that alreday exists in the bios but nothing happened again. Any help?
PS: i am not sure if the ram is 100% compatible with the board

 

[boju]

Are ram placed in the 2nd and 4th slot from cpu? This can happen if use 1st/3rd instead.

 

[tahmid.idk]

same problem ..
my specs are:intel core i5 9600k(9th gen) not overclocked
motherboard- asus tuf gaming b365m plus.
ram-corsair vengeance lpx 3200 mhz.(2x8gb)
I have turned on the xmp profile but nothing works..also I tried manually.. its just as before.
rams are in a2/b2 slots

 

[boju]

Start your own thread please because it's not the same issue. The maximum speed on that board is 2666. Need a Z board if want higher.

 

[ZeP1999]

Are ram placed in the 2nd and 4th slot from cpu? This can happen if use 1st/3rd instead.

dude thanks for the help. this morning i tried the old remove the ram and put it back in... and the xmp already is working... it was the last thing i tried because i needed to open the case but all good now.
thank you very much for your help.