Question XMP profile causes system crash

[cyansand]

First off, here's my hardware set-up. https://pcpartpicker.com/b/tDRJ7P

Memory: CMW16GX4M2C3200C16W
Mobo: ASRock, X570 Steel Legend

My memory is rated @3200, so in order to get that speed from the default 2133 I enabled the XMP profile in my mobo UEFI. When I saved and exited, the system wouldn't turn on. It'd come on for a second and then shut off, couldn't even get back into the BIOS. So, I did a CMOS reset… but now I'm not sure how to get my memory up to speed if not through that profile. Any suggestions?

Thanks!

 

[lynx1021]

Some boards have more than 1 XMP profile , have looked to see if they will run at a little lower than 3200?