Recent content by demonesc

  1. demonesc

    [SOLVED] Best cooler choise

    The stealth cooler is perfectly good if you have decent case airflow. As long as hot air does not sit idle in your case then it will not be a problem. Why spend money you don't need to. Is your GPU a blower style or does it release heat Into the case . Do you have front mounted fans and a...
  2. demonesc

    [SOLVED] Old USFF dell optiplex to NAS box

    Good day, So I have an old ultra small form factor optiplex 790 lying about with an i5 2400 in and i want to turn it into a little nas box for my plex server with some free nas software. The question i have is i can choose from only 2.5" drives im looking at SSHD and HDD , *note : a large SSD...
  3. demonesc

    [SOLVED] Swapped from AMD to Intel driver issues .

    Sorry that was a mistake I was replying on my phone tagged you in error
  4. demonesc

    [SOLVED] Swapped from AMD to Intel driver issues .

    Just an update all we needed to do was reset the bios as it was set to the previous rig , windows managed all the drivers and it works perfectly . So no it's not rediculous .
  5. demonesc

    [SOLVED] Swapped from AMD to Intel driver issues .

    So a friend wanted a cheap upgrade route . He was on a sabertooth 990fx board with an fx8350 We decided to try and keep his 32gb ddr3 ,so decided to go for an i7 4790k as the best thing we could do with ddr3 and chose an MSI Z97 GD65 mobo. So it was an easy swap of power leads and cooler...
  6. demonesc

    Question First PC build not working

    If I can Wade in here , my first ever build in I fried the CPU and motherboard I put the wrong power connector on the CPU 12v ...I had no idea if done it wrong but I found my cpu had a burn mark on the pins ..it was Intel so you could see it .
  7. demonesc

    Question First PC build not working

    Just download the bios file, rename it MSI.ROM and put it into the root of a FAT32 formatted USB. Put that USB into the bios flashback port and you're good to go
  8. demonesc

    Question First PC build not working

    yeah you need a bios update , these have flashback so you wont need another cpu .
  9. demonesc

    [SOLVED] Why won't my MasterLiquid ML240r sync with Asus aura?!

    you need to install the coolermaster software and the asus aura and then the two should sync ...the coolermaster hardware wont work on just the asus software the two software packages should sync when both are installed.
  10. demonesc

    Question Issues recognizing SSD in optical drive

    yeah as i suspected the sata port for the optical drive is 1.5gbps you would bottleneck the drive absolutely no point doing that .
  11. demonesc

    Question Issues recognizing SSD in optical drive

    Ok so the first thing you need to do is get the SSD recognised as a storage device with the original hard drive running windows . Once it is accepted by the sytem then you can start work on what you need to do . Then you can mess about trying to do what you want but honestly it isnt going to...
  12. demonesc

    Question i5 750 only lags on Pub G

    im thinking that the footage i saw was before the hyper thread multi core update so therefore is that the issue ?
  13. demonesc

    Question i5 750 only lags on Pub G

    ive recently put together a budget build for a mate , it was a bit of a project on what we could spend. so an i5 750 , with 16gb ram RX570 4GB a 240 crucial ssd and we have overclocked to 3.6ghz with a 1600mhz ram clock . just cannot get a stutter free run on pub G no matter what we do . ive...
  14. demonesc

    Question random restart

    I removed all overclocking and eronious software . And it did it again . Oh I have installed a new PSU ...it's a cooler master v750 ... It's brand new ..