Recent content by fri77

well, I just had to activate it in the bios, this time everything worked like a charm! thank you for all the advice!

so at the end no new board was needed! a friend found this thread and looks like many people had the same issue https://community.amd.com/t5/processors/ftpm-issue-with-secure-boot/m-p/589392/highlight/true#M52538 booting the bios f61 and then back to the latest worked pretty well. I managed...

Merci Eximo. I just have one more question. So if I get the b550 I have to change the cpu as it does work with Ryzen 5600 but not with my current Ryzen 2600. However, if I get a b450 board, it will work with my current CPU, and it would also work with a future Ryzen 5 with a bios update. (If I...

Hello, well my motherboard is finally dead. I managed to make it work for some time but quite often I had to do a reset with the case button to make it start, otherwise it was stuck not even loading the bios Also, when it loaded, the first time the wifi adapter was never recognized and I had to...

You think it would be better to update as well the CPU with the board ? I don't think the rest of the components are too bad, so if I you think that updating the CPU and board at the same time would be a better combo, I can go the extra mile. What do you mean with clearing it? I did...

Hello I have this PC Motherboard: aorus x470 ultra gaming CPU: AMD Ryzon 2600 RAM: HyperX Predator DDR4 HX432C16PB3K2/16 - 16GB Kit (2x8GB) 3200MHz DDR4 CL16 DIMM PSU: EVGA power 110-BQ-0650-V2 650w OS: windows 11 GPU: Asus Dual 580 8gb Western Digital WDS500G2B0B WD Blue 500GB 3D NAND Internal...

I managed to make it work, but quite often it gets back to the same and I need to press the reset button for 15 seconds till it beeps and runs ok. However sometimes my wifi is not working so not sure if it's a related problem or something from my net adapter (not coming with the board) I reset...

Here is the tutorial I followed. I might have gone till the deleting of the key. View: https://www.youtube.com/watch?v=aQJL56-EfQo&feature=share&utm_source=EJGixIgBCJiu2KjB4oSJEQ

Here the noise and LEDs https://drive.google.com/file/d/1ocqmUZ4ZrtLqaptAEWXilfLpieQMPF3N/view?usp=drivesdk I tried without any hdd/SSD/M2. And also removing the CMOS battery and hold power for 30 seconds. Nothing.

Ok, so I can't do what I said as I don't have a USB bios to install directly. I'm running out of ideas

No, I don't have access. I have disconnected the battery but I didn't tried to hold the start button when it didn't have it. I did look for a switch but I didn't find anything. I will try to add a video of the initial boot. I have a USB key with several bios versions that I flash to the...

Hello I have this PC Motherboard: aorus x470 ultra gaming PU: AMD Ryzon 2600 Memory: HyperX Predator DDR4 HX432C16PB3K2/16 - 16GB Kit (2x8GB) 3200MHz DDR4 CL16 DIMM PU: EVGA power 110-BQ-0650-V2 650w OS: none yet Graphic card Asus dual 580 Western Digital WDS500G2B0B WD Blue 500GB 3D NAND...

it is an aorus x470 ultra gaming actually i turned off pressing the power button for few seconds. I turned on and i had the aurus logo, then it reboot and now it works properly with the f6 installed The GPU tells me that it got the default configuration after a system failure but everything...

Hi, I have an Aurous x470 and i was working fine on W10 with the version F4. I saw there was an update to f6 and as some videos I saw that they said that it was important to keep the bios updated i did. Altough I didn't think that the windows process using the asus utility was so dangerous so...

looks like this motherboard does not have integrated graphics. the problem was in the ram, i changed to the slots 2-4 and now it works thank you