Recent content by HoloTheWise

I have the RTX 4080 FE and I was using dual monitors for a long time. One Via DP (my main) one via HDMI (my secondary). I recently figured why not use DP for my second monitor instead of HDMI. So I plug it in and it will no detect on windows or in nvidia's software... If I unplug my main...

Here is my layout. For all the testing I've been doing I unplugged the 4 port switch to eliminate that as a possible culprit. I currently have IPv6 Disabled and it didn't help. All wires have been checked and are good. I have a device that makes sure their functioning right as well. Ran this...

I've been using Verizon since around 2018 and its has been a pleasure. ROCK SOLID performance. I always could have people on my network streaming 4K, downloading games etc and the internet still preformed smoothly. Voice chat would never lag and packet loss was never an issue. But as of June 3rd...

I ended up just going with the This one. I did it without reading this first and it ruined my windows install lol. It just would not boot into windows after that. So I re-installed, followed your instructions and now it works. Sad to say it didnt fix the issue. So I thought a little outside...

I wonder why it worked with 0 issues until now…. Maybe I just got lucky with some weird driver combo that I lost when I reinstalled windows? I’m tempted to buy another mobo and see if that works….. but idk I’m just so confused. I could install a PCIE Nic but I would have space constraints and...

Motherboard - Asus prime x670e-pro (BIOS VER. 1618) CPU - Ryzen 9 7900x GPU - 4080 FE HDD - Crucial T700 (Issue also happens on my old WD_BLACK SN850) ISP - VZ FIOS 1GBPS UP/DOWN So I wanted to be fancy and get a new PCI.E GEN 5 M.2 since Crucial (who I personally like) released their new...

I was using the MSI MAG Series CORELIQUID 240R and I was kind of getting suspicious of the cooler.. The temps were like I had no cooler at all. 60C Idle temps. I checked out the thermal paste and I saw something weird... It was like all the thermal paste oozed out from under the copper plate and...

I've been looking for tips on OC settings for the 11th gen Intel and I can't really find anything... I know the CPU is actually worse then the 10th gen, but its too late and im trying to deal with it... My issue is getting the temp down... I'm aiming for a 4.7ghz OC, not even anything crazy...

I'm just trying to figure out what to do with said settings.... Cus Default settings make my components too hot. I just recently re-seated and re-applied my thermal paste too, so I don't think its an issue with that. I love Steve's videos but I'm more looking for a guide or info on what...

MAG Z590 TORPEDO Core™ i7-11700K My specs are above. I'm trying to get my CPU temps to cool down. When playing No Man's Sky I stay in the steady 80's (C) and I was starting to look around, and I found my voltage was around 1.45V, which from what I hear would generate quite a bit of heat. So I...

This goes over the troubleshooting I previously mentioned in my post. ...

So I have a i7-11700k and a EK basic 240mm AIO. I was using the pre-applied paste that it came with, and my temps were ok, but hot. I was getting into the 90s @ 4.5ghz on handbrake and this made me a bit jumpy. So I decided to reapply the paste with some thermal grizzly I had. Now when I do...

So I have the MAG Z590 TORPEDO mobo, and I was wondering if I used two m.2 slots if I would be taking a hit on performance, as my one M.2 is PCIE4.0. Would It slow down each m.2 to x2 lanes instead of x4? Since the GPU has x16 and that leaves x4 to the m.2 if I'm correct.

So idk what changed but now it just gives me a "Failed to play test tone error". Though I observed something interesting. When the on board audio is enabled in BIOS (and the logitech headset wont function) it shows a different audio controller listed in the sound settings (first pic). But when...

I just got a new laptop (Asus M16 GU603HM) and love it. But I'm having a heck of a time trying to get my Logitech - G PRO X wireless headset working with it.... Anytime I try it's stuck on "Setting up" in the GHUB setup screen. Then if I go to windows audio and try to test them, it says the...