Recent content by Imozeb

I tried uninstalling the lighting control software (Signal RGB), so now I have no lighting control software other than default Windows/MoBo BIOS and it still happens, except now all the ARGB colors are default static rainbow instead of red.

Just ran sfc/scannow and dism scan health. No issues detected in either

MoBo: Gigabyte Z590 Aorus Elite MoBo Bios Date: 8/23/2021 Memory: G Skill 3200Mhz DDR4 16GB Dual Channel (32GB total) CPU: Intel i9 10900KF (No overclocked) GPU: EVGA RTX 3080 FTW3 Ultra Gaming 10GB (Not overlocked, just maxed TDP) PSU: NZXT C850 (2 years old) Storage: Samsung 980 1TB NVME...

It was working fine for a long time, but now if I put my PC into sleep mode, all of the 5V ARGB lights connected to my motherboard (2x 5V ARB LED strips and 2 Corsair RGB fans) turn on and are red only, not changing colors). How can I fix this? Also, recently my USBs do not power off when my...

I have a Z590 AORUS ELITE with two internal USB 2.0 connectors. Both are being used. One by my NZXT AIO watercooler and one by the front panel usb hub. I just installed corsair fans and need one more internal USB 2.0 connector for the RGB hub. How can I get more connectors? I'm not sure if my...

Case: Thermaltake V200 (front acrylic removed) Fans: Stock 1000rpm (3 intake on front, one exhaust in back) Radiator: NZXT Kraken X53 (240mm) CPU: Intel I9 10900KF GPU: EVGA 3080 FTW3 RAM: 32GB Gskill Ripjaws V 3200Mhz (2x 16GB) SSD: 2x M2 Samsung 980EVO 1TB and 1x 250GB Sata SSD...

I’m looking to upgrade the four stock fans in my Thermaltake V200 case with argb high cfm fans. The current fans only have a max rpm of 1000 and don’t list CFM or static pressure. I removed the front plastic from my case so the front intake fans are unobstructed, but it still gets kind of hot in...

Great! Thanks! I’ll plug them all into one header and save the other for some rgbic fans.

So I should be safe to connect all four to one D_LED header? Im just confused because I thought these 5050 LEDS draw ~60mA each at 12V and there are 120 LEDS on the four strips total so at 5V, we would have: P = VI = 120.06*120 = 86.4W 86.4W = 5*I. So I at 5V = 17.28A

My D_LED Header says that it can support a maximum of 5A at 5V. What is the maximum number of ARGB LEDS that I can safely power? I bought this (50 ARGB LEDS per strip) (4 strips): https://www.amazon.com/BTF-LIGHTING-Individually-Addressable-headers-Gigabyte/dp/B08GSCJPMD/ Also, this is the...

It wasn’t made specifically for PCs but it does have a three pin jst connector where the wires are 5V, GND, and Signal. So I assume if I get the wires to match nothing will get fried? This is the LED board. https://www.hglrc.com/products/hglrc-led-board-w554b-ws2812-for-flight-controllers

So in theory my rgb led board linked in the op, should work in the D RGB slot? Or should I not risk using these since they were not made specifically for PCs?

I have two LED strips from a different project. I’d like to wire them to use with my PC. My first RGB LED Strip is this multicolored one: https://www.hglrc.com/products/hglrc-led-board-w554b-ws2812-for-flight-controllers My second LED strip is a simple, white only two wire one. My mother...

This is what I got using HWInfo playing VR for a couple hours. There were no crashes. Does anything seem suspicious? https://drive.google.com/file/d/1p6LWmSbRVf_cSUqLbAgUU_kArzNFKosL/view?usp=sharing

I backed up all my important data and back up my work data daily to the cloud. Are there any other tests I can run or should I try the HWInfo test first? I ran CrystalDiskBenchmark a month or so ago and it said the HDD was fine. I also ran windows disc check and it also said the HDD was fine.