Recent content by leblanc

Thank you for your reply, I tried using a NVMe enclosure and no avail, doesnt get recognized, im getting support from kingston.

That makes a lot of sense, Can this be made at home? Ill try contact Kingston see If they honor it I bought in the US and now live in Europe, I cant find the receipt of purchase in my emails or the account. Havent ever dealt with them.

I havent tried testing with an Nvme enclosure but Im giving up with the drive, I mean that was my favorite drive and had all my sentimental value all of my data, I did boot after the spillage once why would it survive the boot and shorten before? I have tried updating the drivers, cleaning it...

I tried a new motherboard and it doesnt recognize the nvMe, the only thing left for me its to try with an Nvme enclosure

Yes, the pc even booted a couple of hours after the spillage. But I noticed a bit more water/coke condensed in the radiator, so I shut it off by turning the PSU switch off. After cleaning everything again and let it dry, the PC wouldnt even boot not matter how much I tried, then after days of...

The slot is working because i tried with another nvme and gets recognized, but it hard to believe to me that the hard drive is toasted as after all it did boot once after the spillage, there are far more delicate stuff that didnt get damage and overall everything works but that.

I tried different slot with another NVME and it gets recognized, so the slot is working. Havent tried the enclosure or another pc, any other trick it might get the Nvme start it like using an eraser on the connector part?

October 9th: Hey all, My cat spilled a glass of coke into the top of my pc, I quickly notices because I was listening to music and the music cut off but went back on. I quickly turned off the switch and let it dry for a couple of hours, hair dried all the pieces, ect. It wasnt too much liquid...

Hello, So i tried one more time cleaned everything and suddenly the pc boots, but it doesnt recognize my NVM2 KC3000 the nvme get warm but cant see it on the Bios. I update the BIOS to the latest F38 for gygabyte aeorus. I doubt the NVME is toasted, everything else in the pc works my other...

Hello, So i tried one more time cleaned everything and suddenly the pc boots, but it doesnt recognize my NVM2 KC3000 the nvme get warm but cant see it on the Bios. I update the BIOS to the latest F38 for gygabyte aeorus. I doubt the NVME is toasted, everything else in the pc works my other...

I let it dry, started it up, booted but I noticed a bit of water left on the top radiator fan. Then shut it off. Cleaned everything with isopropyl alcohol and let it dry again. Turned on, and wont boot. The aeorus x570 lights come on the board all fans spin the gpu lights up then lights goes out...

Hi all, My pc had cocacola spill after drying up I turned on and it booted then I shut it off and tried again later and wont boot. What happens: all fans spin, all rgb ON, Icue capellix on, the GPU spin the Light goes On the OFF quickly but keeps spinning. No post no booting. Whats causing...

well i appreciate your time and input, i was very attached to my built, i put a lot of effort in it; cant feel anything but grief, kinda gave up and put everything in a box.

So build another pc? What is your opinion on the actually booting after the spillage once? and when put the gpu on the second slot and started beeping shutting off and on.

Where do I start?