Recent content by nuttedman

Cpu: 5800X RAM: G.Skill Trident Z Neo 2x16gb 3600 CL16 MOBO: Aorus B550i When I try enable XMP, the auto SoC voltage reaches 1.194-1.2V. I have heard that this is way higher than necessary and that I should manually adjust the voltage myself in BIOS. I don't intend to overclock further than the...

I would definitely use fTPM over taking any chances normally but for some reason it causes random stuttering, there's a whole forum on LTT so I unfortunately have to wait for it to get patched but cheers!

I bought this off a trusted retailer from my country so it's not from some knock-off seller on eBay, it puts things into a better perspective for me- thank you for that!

Hi, I just bought a TPM2.0 for my motherboard - it was the only one in stock and was open box (could potentially have been used in the worst case scenario) so I was just wondering, could a used dTPM contain viruses loaded on by the previous user or am I just being too pedantic? TIA

I don't have one at hand, I'll try that out tomorrow, hope it's not problems with my GPU ports

Hi all, I have two monitors connected to a 3080 via two DisplayPort cables. Recently, whenever I move the cable the signal to my monitor is lost. Also, it's strange because whenever I plug and unplug the cable to my GPU, I sometimes need to do it a couple of times before the monitors are...

Hi everyone, I just got the Pro 16Gb DDR3 and wanted to overclock it to 2400Mhz. It runs stable, I've tested it with memtest86 etc. It runs at 12-13-13-36 at 2T at 1.6V @ 2400MHz. I was just wondering if this is safe for 24/7 use? Because the RAM is rated at 1600MHz at 1.5V. Motherboard...

Hi guys, I have a problem with my set of RAM. I bought 2 sets of 8Gbs so in total I have 16Gb of the exact same RAM, same timings etc. The problem is that when I insert all 4 into my motherboard (Z97-AR) I get random BSODs and freezes. Sometimes it's stable for a day or two and sometimes it just...