Recent content by rounakr94

Well, now I know how it might have chipped. When the front glass panel clips in the top channel it slightly bumps against the left side glass panel's bottom corner. This bumping might have caused it to develop the chip as there was a 1mm chip on the front panel exactly where both the glasses...

Today while removing the plastic protection on the tempered glass I see that it is chipped on the left side glass panel on the bottom front corner. Is this a cause of concern as this case has been with me for around 1½ months and the glass didn't shatter yet. Should I apply something there to...

It was memory stability issue. I was running all 4 sticks at 3600 overloading thr memory controller. I dialled it down to 3400 and it's working fine now.

Wifi card is good. Gpu is also good till now. I have dialed the memory down to 3200 to test. Let's see if it's stable.

Memtest86 passed with 0 errors. Also one thing I forgot to mention that sometimes the motherboard will randomly throw a rapid 3 beep code during post shutdown and then boot again.

Okay will run memtest, if it comes out okay will remove the wireless card and see.

Yes all sticks are from same manufacturing lot of same week of same year. They are two kits of two sticks each with serials right behind each other. As per CPUz and Thaiphoon Burner all the chiplets inside also are from same manufacturing lot. Will try Memtest. Do note that these BSOD's started...

I changed my motherboard to a new Gigabyte B550 Aorus Elite v2 in December, since then I have been facing random bsod after login into Windows. Today strangely it gave a complete new BSOD "netwtw06.sys" Google search revealed it to be related to Wifi card (Asus PCI card using Intel 8260)...

Also one more thing to mention, the LED sometimes flickers. But still I will run a full system stress including memory

Just noticed today that the DRAM Debug LED is glowing faintly, and by faintly I mean that its not the full brightness glow which happens when PC is at POST phase. Is this a dying LED or is something else wrong here? All my memory sticks are detected with proper XMP and dual channel and PC is...

After one of my friend said that his PC was giving him shocks I checked that he didn't have a proper cable. After installing a 3pin cable with ground pin I came back and checked my system. Everything was fine and no shocks but there is a slight voltage (~1.8VAC) on the USB port metal part or...

Yes updated that in July from AMD Driver Downloads WebPage.

Updated to 22.8.1 yesterday and so far its stable. Lets see for a few more days.

Hi, Was playing Apex Legends and right after a game starts and I drop on ground the game froze and I get a black screen. The GPU driver recovers and says a driver crash occurred. GPU driver crash happened first time for me. Is this a cause of concern? As my card is hardly 1 year old and never...

NVM, found it in the Asrock forums that its normal for Asrock bios to beep 5 times as a warning when GPU doesn't have anything connected in its I/O. This holds true as system boots up normally with bios post beep after the initial 5 beeps.