Recent content by Syn89

I don't even know what that is, but i will check. Does C state only affect idle power draw or at load as well?

Hello. I have an i9 11900k set to 4.7 Ghz all core and 1.17V. The Cpu is stable with these settings, and at full load temps are good, better than stock settings. My only problem is that even at idle the CPU draws 60-65W of power, at 0% ussage. I tried ussing stock settings and i have the same...

Hello. I want to buy a 1000-1200 watts PSU for a build that wild end up with a 4000 series GPU. I'm not sure how much wattege i will need, rumors say you need a 1200w for a 4090, which seems a bit exagerated, but i'd rather be safe than sorry. Like i said, i want it future proof. My main...

Clock speeds are stable at 5Ghz, as for settings, just the standard: removed all limits, LLC is set to 4, wich is the middle setting(reccomemded for OC by Asus) sync all cores to 5Ghz, 0 AVX offset and voltage set to manual at 1.4V

I've noticed that, even though i have it set at 1.4V in the BIOS, when in full load it doesn't go above 1.23V, and idle is at 1.37. So i should be safe, heck, i could go even higher😅

I know this question was probably asked many times before, but please have mercy on me😊 i don't know which program shows the most acurate reading of the core voltage. I have the core voltage set to 1.4 in Bios, however Hwmonitor shows 1.225-1.235 when in full load and 1.36-1.37 when in idle...

When you say "cause errors" what would that mean? A crash or a quick drop in performance?

I have an 11900k paired with an Asus z590 Maximus extreme and i've been trying to overclock my CPU a bit, just for fun....the SP rating of my CPU is 49, which is bad...but i could get it to 5ghz all core and 0 AVX offset to be stable at 1.4 V, which is a bit high probably. Temps at full load...

I know i have to run it in gear 2 but a lot of benchmarks show better performance in games at 4400 mhz. What timing should i use for this frequency?

I just bought a 4×8 Gb ddr4 kit, it's Tridentz royal elite at 3600mhz cl14. I will pair it with an 11900k and an Asus z590 Maximus hero extreme motherboard. Do you think i could overclock it to 4400 mhz at cl19 or 18? And how do i do it? I know ram speed won't really make a difference but i want...

I know i won't have them running in quad channel but i wanted 4 just for aesthetic reasons...

At the moment i have two dual channel kits from hyperx fury black which i bought separately and they work just fine...didn't try any overclocking, but on these new ones i will and i want to be sure there wouldn't be any compatability issues

I want to purchase new ram for my PC. I'm looking at the Corsair Dominator Platinum RGB 3600mhz and i want 4×8 Gb. Do i need to get a quad channel kit or can i get 2×dual channel kits? My reasoning is, if they are the same, two separate dual channel kits shouldn't be a problem, but i wouldn't...

I understand what you say...but if you really wanted fans down there, what would you pick? Static pressure or airflow?

So you're saying no fans is better than having extra fans to bring more air to the GPU and inside the case? 🤔