[Moderator edit to break up solid paragraph of text.]
I recently installed a ASUS TUF Gaming B550 with Wifi II motherboard in to a Gamdias Aura PC case.
Case has 4 RGB fans including necessary wiring but no instructions. I am not using an RGB hub or controller, just the stock case and...
Hello guys so I recently purchased a new motherboard Asus rog strix b550-A. After putting it into the pc and connecting everything the rgb doesnt light up.. my pc works and everything byt rgb doesnt, I tried to install the drives and that also didnt work. I have the latest bios update. (In...
Hello all,
I started building my own pc but I came to a halt because my motherboard only has 1 x Aura Addressable Gen2 Header and i need at least 3.
The case, my AIO and power supply needs to be connected to it so I can use the aura sync. Any ideas how to achieve this?
btw I am quite new to...
I have a 5v led strip but I'm quite unsure how I could connect it to my motherboard as it seems to be 12v. The motherboard is an Asus prime b450-plus. Could something bad happen if I do connect it? Or is there a way to change the voltage?
The first time I tried it didn't work the normal way. I couldn't get it uninstalled by normal means. Then I had a not so great idea it seems. I erased all folders that have todo do with the software but windows still thinks it's installed somehow. So I tried Revo Unistaller to erase any trace...
I had a build with a 9900k, a z390e gaming from asus and my rog thor psu, the problem is that my Motherboard needed to be changed as temperature issues and I will get a gigabyte z390 aorus master, it has an ARGB header but Im hella worried if my PSU lights will work on RGB Fusion (I know is a...
Hello recently bought a motherboard asus rog b365-f and a liquid cooler ml120r rgb.
And my question is the motherboard has only RGB header while the cooler has ARGB fans, iv connected the cooler to the motherboard through a usb thingie and it works but the motherboard lights and the fans are...
So i have 32gb of trident z royal i built this pc about 2 months ago and there was no problems i had aura and i could control rgb and everything but the other day i turned the computer on and went into aura and it no longer showed up and is stuck in its deafult rainbow mode. I have tried so many...
Hi guys,
I went to Armoury Crate software for my Asus Motherboard Z390E (brand new) and clicked update and updated all asus software. From that update, my asus aura and armoury crate does not recognize motherboard. I can change lights to light strip, graphic card, ram and on my ARGB header. My...
I couldn't seem to find exactly what I needed by searching the forums so I thought I'd post this.
My problem is simple, but I can't find a solution. I just swapped my parts into my View 71 ARGB Tower that I purchased a few days ago. Absolutely everything is connected fine and it looks amazing...
I purchased a Maximus XI hero wifi and installed an EKWB water block with addressable rgb lights. However when using aura, I can't seem to find anything or figure out how to control each individual light? double checked all connection so its not a hardware issue. I tried reinstalling Aura and...
Hi there,
I am trying to find out how the lights on the Gigabyte GeForce RTX™ 2070 GAMING OC WHITE 8G are controlled. I will be using an Asus x570 motherboard. Does the motherboard control the lighting or is that done by the card itself using Gigabyte's software? This is my first PC build so...
Here is what I mean.
I want to buy Raidmax NV-R120FBR3 kit, which is basically a set of 3x Raidmax NV-R120FB ARGB Aura Sync compatible fans, an ARGB 5V controller/HUB and an RF Remote.
I own an ASRock H270M Fatal1ty Performance motherboard, that is not ARGB compatible, meaning it does not have...
I need to connect everything including 3 led strips/ 6 fans/ and 4 rgb Ram heat sinks. the fans and heat sinks are daisy chain-able. I think what i need is a controller but i am not sure. I just want to be able to control everything using aura sync.
I bought Asus ROG strix gl-503g and a logtiech g102 mouse
i used the rgb lighting of laptop for a day everyhting works fine
later i installed logitech gaming software to change the values of mouse. From that onwards the the aura effects isnt working
the last profile i used isnt changing
so i...
So im not sure where to post this but every time I try to install Asus Aura when i open it it says "Asus Aura stopped working" and it never works. Im not sure what to do any suggestions?
Hello everyone!
I final have a full room, to be dominated by my pc and other gaming stuff and I have this 'insane' idea, what I don't know how to do properly.
I want to extend the RGB lights (controllable) from my pc to the whole room. It's ~30 meter in total, cut into 12 sections, 2...
Hello, I've got an issue with my mobo.
Recently wanted to switch to a DisplayPort cable but after connecting and booting I noticed that my LED strip (LED STRIP 2) was not synced with the rest (green led was not lighting properly).
The issue disappeared when I switched back to HDMI.
Any ideas...
so I have a DIYPC case that has some nifty RGB lights on the front and a single fan in the back.. they light in a linear fashion and look very nice they have their own controller that is either on or off (switch on top of case) and it has a 3 wire RGB connector that has 4 sockets w/ one...
I recently just put in a zotac rtx 2060 graphics card and it runs games faster than my old 1060 but my startup and overall computer loading speed is slower, sometimes programs such as youtube crash as well. I updated the drivers for my 2060 but is there something im missing here to make my...
So I recently bought a 1070 on ebay and its been performing very weird. I get really bad frame drops in most games. Its will run fine for ~15 seconds then for ~1 second it will freeze. Which makes the game unplayable to me. And on top of that there is screen tearing which makes it worse. If I...
Hello everyone!
A couple days ago I put together a old new computer from parts I got from my neighbor. He gave me an AMD 4400+ AM2 CPU, an ASUS SLI-M2N68-LA Motherboard, a couple 1GB sticks of RAM and a GeForce 210.
I have assembled computers before, but I am not sure what is wrong with this...
So i have this combo http://www.eagletec.com/product/keyboards/B00NW6E2VM/28#tab-additional_information
and this motherboard https://www.asus.com/Motherboards/H110M-C/
Can anyone tell me why they are always on while the pc is turned off and whenever i power up the keyboard color goes to back...
okay im a bit confused.
is my amd a10-7860k bottlenecking my AMD RX 560 2gb OC?
im not having the expected performance that i was hoping after buying the GPU.
current Mobo used: gigabyte F2A68HM-S1
need urgent responce.
was planning on replacing my mobo and processor