blank

Forum discussion tagged with blank.
  1. S

    How To (Workaround/Temp Fix) Screen Goes Black & GPU Fan at 100% Speed

    UPDATE: This was supposed to be a discussion thread but since my workaround is not mentioned in any forum/YT video whatsoever, I changed the thread prefix to "How To". Just go to the bottom of this post and you'll see the workaround. Cheers! 🆒 I noticed many people have this issue and have...
  2. O

    [SOLVED] My GPU will display for 20 minutes (or so) and then cut out. However all the fans still keep running and no display comes back

    I have recently bought a second hand R9 390 and when I installed it, the display lasted around 20 minutes and then suddenly cut out. Sometimes when I restart, the display will appear but sometimes it won't My build is as follows: MB: ASUS B85M-E GPU: XFX R9 390 PSU: CORSAIR VS650 CPU: Intel...
  3. F

    [SOLVED] Second monitor is blank

    I bought a cheap used monitor (ViewSonic VA926 to be specific) for school purposes, but when I try to connect it to my laptop the external monitor is blank. Yes, : Windows does detect it and it shows up in display settings. It shows up in device manager as well. I have all the drivers up to...
  4. A

    Question CPU PINS CAUSE NO VIDEO SIGNAL?!

    Yikes! I bent some pins in the CPU socket, and I put a used core (i7-3770) in the LGA 1155 Socket, Dell Optiplex 790. There was no video output, but the signal was fine. I put in the old core, and there was still no video. I will supply some pictures below. Image 1 Image 2 Could it really be...
  5. tsomek

    Question tightVNC blank screen when screen off

    Hi, I'm using tightVNC on a windows 10 laptop. When I close the lid, the vnc image goes black. Before reinstalling win10 yesterday, the vnc image would work without a problem even with the lid closed. How can I make this work again like before? Many thanks
  6. J

    Best chairs for gaming?

    Hey guys, I've been looking for a new gaming chair for a while now... I really did not expect it to be this hard, lol. I looked at racing chairs, like DXRacer and AKRacing. However after a while of looking I found that they are not the most comfortable. I saw some chairs from Herman Miller, but...
  7. L

    Is this pc compatible (firs pc build and I want to make sure)

    Is this pc compatible?: https://docs.google.com/document/d/1Ijk6a2_xxGEcIc11ugaukAaoDgWomRVYNCSKNNYCKE4/edit?usp=drivesdk
  8. 1

    The difference between the two

    what is the differences between x86 and x64?
  9. S

    UserBenchmark Bad overall results

    Hello, i apology for my Bad English, and my bad Grammer. My Components: Mobo: ASUS Crosshair V Formula Z CPU: AMD FX 8320 Piledriver RAM: Kingston HypyerX Savage 1866 HDD: Sata II Seagate Barracuda 7200 rpm 4 TB GPU: NVIDIA TITAN X PASCAL OS: Windows 10 Creators Update PSU: BeQuiet Pure Power...
  10. S

    i7 7700k safe temperature?

    Hello. So I recently got my i7 7700k, and I was wondering about the temps. On idle, I get around 30-35c, with some few dips/spikes up to 40c. However when I play a game for like 2-3 hours, the temps sits around 60-70c but get random spikes up to as high as 85c! The spikes are only there for...
  11. M

    I formatted the Lacie d2 quadra disk before opening the setup assistant, how to make it working again?

    Hello everyone, By mistake I have formatted the disk before opening the lacie setup assistant. Now the disk is devided into empty lacie setup and two unallocated partitions. I cannot make the disk working and lacie support does not give anwsers. Maybe here someone had a similar problem? I...
  12. R

    Blank screen after "Scanning & repairing drive C: , Phase 0 watch dog" Windows 10

    I have an Aspire V 14 Touch Windows 10. Recently, as I tried to open it, it prompted "Scanning and Repairing drive C:". It took a little while to finish but it did. After that, the usual loading logo of Acer comes on but then after that it prompted some sort of actions stating "Phase 0 Watch...
  13. C

    DDR4 RAM Won't Fit

    I've been having a lot of troubles with my RAM. No matter what I do it won't click in. Whenever I try to run my newly built PC it beeps indicating bad RAM. Sometimes it doesn't beep however nothing appears on the monitor. RAM: http:// MOBO: http://
  14. N

    Optimal temperatures for my pc.

    I was wondering what the lowest temps are for my computer. This is the computer i have http://www.bestbuy.com/site/ibuypower-desktop-intel-core-i7-8gb-memory-2tb-hard-drive-120gb-solid-state-drive-white/4513605.p?id=1219756371239&skuId=4513605. I have added a fan to the 4 in it already and my...
  15. C

    Running Games on low fps even with decent specs?

    I had my computer for about 2 years but recently I played some games and it seems like i am getting low fps when I shouldn't be. For Example in Arma 3 i can only run around 15 fps even on the lowest settings Specs: Operating System: Window 10 Home 64 bit CPU: Intel Core i7 4771 @ 3.50GHZ...
  16. J

    Will this Solution work?

    Case Power Supply Video Card I was trying to build a rig and haven't built one since around 08', I just want to make sure that the video card would fit and that there wouldn't be any glaring problems.
  17. S

    Similar Motherboards Like Intel DH55TC

    Hi guys! I am currently using the Intel DH55TC mboard and the sad thing about this board is that it is not accepting a new udimm 4b 1333 frq ddr3 ram that i bought. I want to buy a new mboard wid similar specs so that i can use the new ram along with my old one. The old ram is 4gb too. Same...
  18. M

    212 evo runing at 60 degrees at idle??

    please help me, ive been looking for help everywhere, but i cant seem to really find any, here is my degreeses at idle http://imgur.com/NBLDKZO someone please help fast,
  19. M

    Help! My SSD says "System Reserved" and says I have 23gb available out of 23 gb when it should be 120gb

    I don't think I have windows 10 on it either, I just installed windows 10 on my hard drive about a few minutes ago. What do I do?!
  20. W

    2300$ Rendering/gaming PC 2015

    Hi guys, not much to say. It's supposed to be a good rendering machine (After Effects, Premiere, Encoder, Cinema 4D, Maya etc.) and that's the bigger focus. Gaming comes second. I just want to know if all the parts are allright or if I can save money somewhere and if everything fits. NOTE: I'd...