Clone boot problem

Cloning a 250gb sk Hynix ssd to a 2T WD blue SN580 with macrium reflect free I started the 30 day free trial the same night right before I started the cloning and it looked around 15 from when I hit start for it to reach 100% overall then it just has been stuck on 100% for over 10 hours now with...

Hey all, family friend asked me for some support with one of their business computers. Old machine crapped out on them and I was able to get the 400GB Lexar SSD out of the machine and create an non-Bitlockered backup using Macrium Reflect on an external drive to verify all data and files are...

Hi there, Thanks for reading this. My system is Ryzen 9 3900x, NVM SSD 1TB, SATA SSD 1TB, Gigabyte Aorus 570X Master. I want to get a fresh new Windows on the NVM SSD, on which currently I have current OS. With an intermediate step and with preservation of current OS working from the SSD to...

Experienced PC enthusiast here, looking for advice on what to do here. I'm trying to clone my mom's old hard disk (upwards of 8 years old) onto an Nvm-e. Every time I try it, my progress stops at about 40% and will not progress further. I left it overnight and still no luck. I tried defragging...

I just purchased a new Samsung 1TB model 970 to replace my almost full 500MB 970 m.2 . I activated the new HDD and selected Simple Volume on Disk 1 and MBR. I did a quick format. See two attached files. I WAS going to attached a bunch of screenshots here but all I get is a box to put a URL...

Hello, I had recently cloned my 1TB WD Blue HDD to my Kingston 240GB SSD. Upon cloning, I had just wanted to clone the system and with AOMEI I had done so. After doing this I had waited 8 hours or so and everything seemed to have copied over. Including the partitions and system files. I had also...

My intention was to clone the drive that has windows and put it into a new larger drive and use that drive to boot windows. I have windows currently on my C drive, an SSD that is 120 gbs. I purchased a 500gb SSD that I intend to move windows and all other C drive content to. I used Macrium to...

Alright so recently I decided to upgrade my laptop storage from a HDD with 150-ish GB of storage, to a 500GB SSD. To my surprise, when opening up the computer there was no harddrive in the slot where the SATA-cable was, which meant that the current harddrive was integrated/out of reach elsewere...

Hello my friends, I've spent the last 7 days trying to clone my SATA SSD to my new NvMe SSD in the hours after work. So my problem is: My cloned NvMe won't boot, it throws BSOD "INACCESSIBLE_BOOT_DEVICE". A fresh install works, but I really need it to be cloned for various reasons. Now, the...

Hey Guys - After issues with my 512gb ADATA M2 SSD, I had to RMA it. Therefore, I used Macrium Reflect to clone all of its partitions directly to a 256gb Samsung 850 Pro. I did so, shut down, disconnected the M2, then booted back up to the 850 without issues. Recently, the RMA came back and...

Hello! I've had this happen to me a couple times now helping out various friends. This latest time, I have a Dell laptop with a 1TB 5400 RPM HDD that I cloned to a Samsung QVO 1TB SSD. First, I installed both drives into my PC (Windows 10, asus P9x79 mobo). The old HDD with a USB3 to SATA...

hi everyone, i just recently built my first pc and followed this exact build guide on youtube View: https://www.youtube.com/watch?v=8gfAMYnQtDs&t=1430s specs: GeForce RTX 2070 SUPER Intel Core i7 9700K Processor Gigabyte Z390 I AORUS PRO WiFi Mini-ITX Corsair Vengeance LPX 16GB DDR4 RAM...

I cloned my hdd to my ssd(Samsung 860 Evo) using samsung data migration software and when booting to it, it says a disk read error occured. I removed my hdd when I booted, and already have checked if the SATA cables have gone bad(tried plugging it to my hdd). Should I just do a clean install of...

SO finally after 2 years I decided it was a good time to add a SSD to my rig. For a task that seems so simple it has caused me such a headache. I still am struggling to decide which cloning software to use but right now I am trying to Acronis True Image WD edition which I found purely from the...

So, I have a 2TB HDD which is split into 2 different partitions, my system partition (C, 500GB) and another partition for games and stuff (with the remaining 1.5TB). I recently bought a 500GB SSD and i want to clone ONLY my C partition so i downloaded EaseUS Partition Master and when i tried to...

I don’t quite know where to start so forgive me if I add too much or too little in my explanation. Anyhow, here are the specs for my previous PC config: MOBO: Gigabyte Technology GA-Z97-HD3P, LGA 1150, Intel Motherboard CPU: Intel i7-4790 3.2 GHz Memory: 32GB Corsair Vengeance DDR3 (1600Mhz)...

Hi there, I just bought a Samsung 970 EVO Plus 1TB NVME M.2 drive and I cloned my old 1TB WD Blue SSD to the NVME drive. Now I unplugged my old SSD to make sure I could boot from the NVME drive and it worked fine. However upon plugging in my old SSD to format it and use it for more storage my...

I have ,Intel (R) Pentium (R) Cpu G2030 @ 3.00ghz 3.00ghz processor , Intel graphics 32-bit and 60pHz and 1280×720 resolution , 2 GB ram,,,, can I run GTA 5 in my computer.