Compact Flash

Hello,i want graphic;s card but idon:t have the function my laptop is dell vostro 1540.

Archived from groups: rec.games.video.arcade.collecting (More info?) Does anybody know where to buy a belt for the famicom disk system? I am planning on buying a FDS but it needs a belt and I havn't been able to find any online. I had thought of finding a VCR belt that would fit but I'm not...

hi guys im having a problem with my wireless internet here im using a wireless router with ADSL and ethernet all in one - D-Link DSL-G604T and my pc is using the D-Link USB Wireless Dongle - D-Link AirPlusG Wireless USB Adapter the thing is after i install the dongle driver and connect it to...

Was just wondering if anyone out there could point me in the right direction for drivers for the Radeon 6670? I have almost always used D3D but was hoping to give Open gl a whirl. Seemed kind of un stable with the open gl support.....froze up a couple times. I'm only playing UT and 99 at that...

Hi all, Come Sept when the P4 2 ghz chip is released I will be getting one in exchange for some services I did for a guy. All the motherboards I have seen so far that are likely to handle this chip have only had rambus ram, which from everything Ive read, is not only expensive but a bit...

I currently have SLI gtx 560 ti's, 1gb EVGA models. I want more performance and I also built a custom water cooling system, and I thought the GTX 580 hydro copper looked pretty cool since it had the waterblock already on it (And it has 3gb of vram). So, does the 580 stand above the 560 ti SLI...

I need to know. Can the DVI port,VGA and HDMI work at the same time? I have been trying to make ti work and no luck...nothing.The software just not letting me run all three

Hey Guys, This is a follow up to an earlier question I had posted. Seems the rig I opted for is a little above my budget. Here's the config I'm hoping to get now: Cooler Master Elite 431 Plus Mid Tower Cabinet Corsair CMPSU-GS600W 600 Watts PSU MSI 970A-G46 Motherboard AMD 3.3 GHz AM3...

if anyone could please give me the dimensions for just the screen (not the frame) of the typical Asus 24" and 25" (HxW) I would be very grateful. thank you

https://www.aria.co.uk/SuperSpecials/Other+products/22%22+Arianet+MN22AOCF22%2B+Widescreen+LCD+Monitor+?productId=41892 i want to get this monitor because im on a budget and ive just gone over the limit by a few pounds and dont want to go over anymore. However im wondering if that monitor is...

Ok this is a dumb question. I have a blacx thermaltake hdd docking station but I lost the original adapter for it. On the website it says it uses a 12v dc 3amp. After going through my box of adapters, I found a 12v 2000mA. But after the output 12v instead of a dc or ac, it has two horizontal...

Hey guys, I'm in a bit of a jam hopefully someone can help me out: I have a Samsung T260HD monitor that my friends just put a nice new "ding" in the middle of the screen, so I am looking to buy a new one to replace it with but the item has been discontinued by the manufacturer. Now I know the...

Hello,my canon ip 1700 is not working yet... the LEDs on it blinks alternately for 8 times...What i have to do?????? Can anyone help me,please........

Hi, this morning, when I turnd on my PC, I found out, that the monitor (Samsung Syncmaster 2053BW) is not working. I tried DVI and VGA but still of no avail. I connected another monitor to this PC and it worked. Later, I found out, that the Samsung monitor starts after 15-30 minutes. During that...

i have just brought a lexmark s305 i was told that this was capable of direct printing to dvds the problem i am haveing is finding the hardware to go inside to do this job. what do i need and where can i purchase this equipment from

I'm about to buy a 20'' lcd. I wanted to make sure I can get the max resolution of the monitor's capabilities using the VGA cable. And yes, the source will be able to output the monitor's max resolution.

Hi, I'm looking to get a 24" monitor to go with my new computer (kind of excited to see what it'll look and feel like with one of those 8800 cards). I've done some research here and there and it doesn't seem like there's any particular enthusiasm for any of the available models. Based on...

Hello, Got a few questions for those who own or have used the Canon Rebel XT: Can the Rebel XT use other camera lens like Nikon's? Is it required to use Canon's own lenses to take full feature of the Rebel XT or does not matter what lens is used? Better to go with a zoom which has fewer...

Hey all, I just bought a Samsung 205BW but I'm kinda having buyer's remorse. Is it worth the extra 90 to go from the Samsung 940bw to the 205? I know the resolutions are different but I bought the 205 thinking I was used to the 1680x1050 on my laptop. Thoughts? Recommendations please.

Hey, On a black wallpaper the icons on the left side have a slight glow on to the right of the icon. And icons on the right side have a slight glow to the left of the icon. Same thing happens to the mouse pointer. Is this glow normal, due to the big contract of black and white? This monitor is...

Archived from groups: comp.periphs.printers (More info?) Hi all I just recieved a DEFECTIVE LEXMARK X1670 AGAIN. This is my 2nd replacement and its defective. I am so MAD now. Anyway enough abou that. Has anyone have or encounter problems with the Officejet 5510? I am an HP fan but just...

I plan to buy a Viewsonic NextVision N5 TV tuner box and connect to my 19" monitor, to preserve the best possible signal, I want to connect each VGA and TV signal separately to the monitor, rather than using the pass through feature of the box. I am looking for a Female to two Males vga spiltter...

Archived from groups: comp.periphs.printers (More info?) Anyone have a suggestion where i can buy reasonably priced replacement inkjet (UK) cartridges for a Dell A920. Its nearly as cheap to buy a whole new printer with DELL! Ta

Archived from groups: comp.periphs.printers (More info?) Recently a poster, Steve, I believe, posted a tip on putting a cart (HP #57 tri-color) in a sauce pan with 1/4 inch water and bring it to a simmer. I can not find your post and do not recall the procedure sequence. It worked great the...

The Epson 3200 Scanner review was good, but it seemed to only compare Epson to Epson. I need a high resolution scanner, but I also need a scanner that has an Automatic Document Feeder, either standard or as an option. This is something that Epson does not offer. So that has me looking at HP...

I just received my vp171b from dell peripherals for $431 (keep an eye out at www.xpbargains.com for great dell deals) This display is beautiful...it's even more ergonomic than i thought. One thing though, the icons in Win2k aren't displaying correctly. Some of them are grainy as if being...

Well, we're having a HUGE unit in english class writing a research paper, and I have decided to do it on LCD technology, and the advantages and performance of each, with future improvements. It'll probably take a month (when the paper is due), so I may post it then, in case anyone feels like...

Hello,

Hello,Camera showing Blue screen with 5f 08 and 5e 02 Lens comes out and in again but wont lock

Hello,is it wise use a propriatary product or service around your business

Hi, I am posting this thread here as i need some help with my new upgrade choice. AMD Setup: Gigabyte AM3+ 990FXA-UD5 - 159Eruos AMD AM3 Piledriver FX-8350 for 200Euros Corsair H70 - 79 Euros TOTAL = 438 Euros Intel Setup: Asrock Extreme 4 Z77 - 144 Euros Intel Core i5 3570K - 209...

Sabertooth 990FX MB 40inch Sony Bravia Ex720 3D 1080p 240hz 1920x1080 Resolution 3.8 (OC) Amd 970 Black Edition Phenom Quad XFX Amd Radeon 6870 1gb 900m Crossfire 16gb Kingston Hyper X 1600 (OC) Corsair Enthusiast Series 850-Watt 80 Plus Bronze Certified PSU WD Caviar Black 7200rpm 64mb...

hey there, to start off this is for my friend mostly hes buying my gpu off me which is the 6970 direct cu 2 and needs a new power supply any ideas on a good supply for that card thats fairly cheap at the same time? and was about to ask if i would need to get a new power supply because im...

Hi guys, I am having some problems with my Graphic's card. When I open GPU-Z, the gpu part is showing 0MHZ. When I installed the drivers I get error 43 (Code 43: Windows has stopped this device because it has reported problems) on Windows 7 and Error 10 on Windows XP. (same error really.) The...

I'm looking to hopefully upgrade what I can of my current system as cheaply as possible while reusing as much as I can. I'm not entirely sure what can all be salvaged at this point, as the system is getting a bit long in the tooth. This rig has been, and will be used for gaming. I'm not looking...

Ok, hey all. I have a Netgear WiFi router that worked fine with my Acer notebook up until I built a new Desktop PC. I am not sure what card the notebook has but I'm sure it has a 802.11b frequency. My Desktop has a Belkin 802.11g card installed (I heard g is faster than b so I went for this...

I am Building a new system CPU: i5 2500k MoBo: asrock exteme3 gen3 Memory: gskill 1600 8g psu: corsair tx750 v2 and i am now at the picking a video card phase, and I'm leaning towards nvidia just cause they seem, as i have read, to be just a better built and supported (drivers) card I can only...

Archived from groups: microsoft.public.windowsxp.newusers (More info?) Having just converted from Win 98 to xp I can't locate route to carry out a backup. Can anyone advise please?

I AM HAVING A PROBLEM WITH MY LAPTOP ''HP MINI 110-3713 TU'' i have changed its window from 7 starter to 7 ultimate and my wifi driver is missing and its not working now..........please help me to find it out......

my mp3 MoVo M200, 512MB is not getting on if it gets but with in few seconds it turns off. even i am not able to format it. what can i do for it. thanking you