GPU help

Forum discussion tagged with GPU help.
  1. o3u6

    Question Need help determining the reason for stutters and FPS drops after upgrading GPU

    Specs: i7-11700k 16GB 3000mhz 4070s (upgraded from GTX 1080) 750W 80+ Gold PSU NOTE: I play on 1080p 60fps exclusively. So far I've tried Cyberpunk and RDR2 at the highest settings, with GPU Util. ranging from 60-70%. In both games, stutters and frame drops happen in intensive areas, such us...
  2. M

    Question GPU help - ultra settings - 60fps 1080p

    Hello, I currently want to upgrade my GPU and need help with making the right choice. My target is to play modern games (2024+) on ultra settings with 60fps, on a 1080 resolution and for the GPU to be as future-proof as possible, the lower its temperature the better I would prefer not to...
  3. M

    Question My graphics card, Nvidia RTX 3060 TI (12gb), is having issues.

    Basically, I cannot access my screen, everything else in the PC itself turns on except for the GPU, I was told I have driver issues and to hook up another graphics card to update drivers, however; The only other graphics card I have (access to) doesn't fit in my case My CPU, AMD Ryzen 5600x...
  4. F

    Question GPU not running at full potential ?

    I've had my pc for about two years now. During that time I've noticed games not running as well as other benchmarks of my graphics card. The game I am going to use as an example (Because it is the most effected by this issue) is Call of Duty: Warzone. This game has never run well in the time...
  5. Riley M

    Question Red flashing light on RTX 3050

    Occasionally (not every boot), my GPU will have a red flashing light where the power cable connects to it. I have read that it is something do with a lack of power to the card, but I have a 650w power supply (which is more than enough). The pc also boots as normal and there is no evidence for...
  6. R

    Question Green screen just after POST ?

    So I get a solid green screen(3060ti) just after post screen before windows loads, replugging my hdmi cable back in sorts the picture from green to normal until next restart. Started about 1 week ago so I decided to update drivers as I saw new ones were available. When I boot into safe mode no...
  7. NTfarm

    Question PC POSTING ERRORS

    I recently got an rtx 3060 to put in my pc. Putting it in results in the pc fan spinning then stopping immediately. But the pc boots up as normal when the gpu is not installed, it also boots when I don’t have it plugged in to the pc but connected via the pcie cord. My pc specs are: Ryzen 5 2600...
  8. Juszf7

    [SOLVED] Fan 2 stays at 0 rpm under load.

    In Precision and from irl observation only fan 1 spins under heavy load. (Like 100 percent benchmark load) It says " Fan 2 0 RPM 52%" in precision and even when I add a custom fan curve it still stays at 0 RPM.
  9. Miltosss

    [SOLVED] cant do 1080p 240hz on 760gtx

    Hey, so my monitor is allienware 2521hf and with a previous newer card i could do 240hz just fine but now with the gtx 760 i can only go up to 144hz, i have the dp cable that i could do 240 on peviously so whats wrong?
  10. setter43

    [SOLVED] I'm a newb and don't understand Graphics Cards!!!

    Hello there, I have some basic PC knowledge from a previous build. But when it comes down to GPU's I often find I mistakenly overlook factors/performance here and there. My current build was a few new pieces and parts salvaged from my previous tower. Here is my Current Build more or less...
  11. MrGoblino

    Question Will my ryzen 5 1600 support 2060 if yes will it be decent?

    I was just wondering if I would of bought an 2060 supported my pc and motherboard My motherboard is a A320M-S2H V2 CF and my CPU is a Ryzen 5 1600 will it be fine if yes will i run games nice and smoothly?
  12. LeJaja

    [SOLVED] Rusted capacitor/resistor on 1050 ti

    I just noticed that my gtx 1050 ti has some rusted capacitors or transistors, i just noticed now. i dont overclock i dont use watercooling, everything seems to still be working fine, no artifacts. Its my only card rn and i cant afford a new one (ik its an old card). any tips? here is a pic...
  13. P

    Question MSI Afterburner shows Power %, and Memory clock spiking to max while idle and during games

    Hello, so MSI Afterburner shows that my "Power, %" and "Memory clock, MHz" are randomly spiking to max at the same time, it very predictably happens when I open any program, and occasionally from idle. The GPU seems fine, normal temps for idle, when gaming before this I had what I believe to be...
  14. P

    Question Nvidia GTX 1070 Fans spinning full speed but temps are fine

    I am currently running ryzen 3600x (33c on idel) Nvidia gtx 1070. Pallet make 16GB DDR4 750w psu Windows 10 pro. 256GB ssd 2 x 4Tb HDD 2tb External HDD A few weeks ago i had a problem with my gpu fan starting and stopping whenever it wanted to. Some times at 40c 45c sometimes 49c lower or...
  15. B4D455

    [SOLVED] There are 2 ports on top of the Quadro 4000 ( a 4 pin and 20 pin) what do i plug into these?

    I have recently bought a Quadro 4000 but it came with no cables. there are 2 ports on top ( a 4 pin and 20 pin) what do i plug into these?
  16. Ninjarelic

    Question GPU recommendations based on system

    Im looking at upgrading my video card, but I'm very worried about compatibility issues and want to check with everyone here before purchasing anything to make sure the card i buy will cooperate with the rest of my system. Heres what i have right now OS: Windows 10 Home GPU: Amd R9 380...
  17. C

    Question Gpu ramdonly getting low perforance

    Parts list Mobo: Msi B450 pro M2 Cpu: Ryzen 5 2600 Gpu: Msi gtx 1060 6gb gaming x PSU: Masterwatt 650 watt semi modular Ram: 8gb corsair vengance Hard Drive: 1tb barracuda I recently got this setup about 6 months ago and it was performing great! I was getting good fps on all games and I...
  18. L

    reset password unknown

    My son gave me a toshiba satelite, he does not remember setting a password. the day we picked it up he just hit the button and it turned on. now it wants a password. Is there a way to get by that.
  19. M

    How much fps?

    How much fps should I get for this build: http://pcpartpicker.com/p/WPwCt6 How fps in minecraft and bf4 with settings all the way up
  20. hypogogic

    MSI X79A-GD45plus cannot boot or even load bios...please help

    So here's my problem, couple of days ago I turned my PC on and it gave me an error message. "Windows failed to start. A recent hardware or software change might have caused the issue hit enter to restart" upon hitting enter nothing happened so i took out my boot drive and formatted (wiped...