Hardline Tubing

I have an O11 Dynamic Case with a MSI 570s Carbon motherboard. My reservoir is a EK Reflection front face distroplate. I have a AS Rock OC Formula RX 6900 XT gpu with a Bykski waterblock installed. Running a EK CoolStream PE 360 triple radiator up top and EK slim 360 radiator at the bottom. My...

I swapped out my wifi adapater and when i turned off my computer and flicked the back switch off i pressed the power button to make sure all the powers out. Make it completely dead of power, which is what ive done for years with no issue. Just to note, right before this, unrelated to the wifi...

So I was trying to fill my new hardline watercooled pc but first i cleaned my fill bottle with some dish soap and then rinsed it a bunch of times. But I was being stupid and I guess there was still some soap left in the bottle so when i filled it with water and then filled my pc with it, the...

Sorry in advance for not having a picture, I didn't think about it before I left for work. I just added my GPU to my custom loop and had limited tubing to make my bends, one of which needed to have 4 separate bends since I didn't have any extra 90s. The tubes are not straight, they definitely...

Hi so I just completed my watercooled PC, and when I was putting in the components the GPU fitted but only clipped at the clip. I cannot push the card any further. I have no signal on monitor but at one stage it was working and I was able to get into the bios. I would prefer not to have to drain...

Hi, can someone please help I'm fairly new to water cooling PCs I think I have made a major mistake I have bent the tube that goes from the pump to the res and I can't get any fluid into the pump so it can't do its cycle. Please someone help me come up with a solution, the fluid was expensive so...