Hi, I have a Hyper X Genesis RAM running at 1600MHZ and 9-9-9-27.
I set that timing at bios on my B85 Killer by Asrock..
My question is how do i know what is a better timing than those above? Are my timing correct or maybe you guys can give me some info about RAM timing? Thank you very much.
In another post I heard that 2400 might be too much for gaming, that 1600mhz memory are enough, but my question is why?
What kind of apps benefit from such kind of memory?
Ok So basically my PC (GTX 770, i5 4670k, 8GB Ram) usually lags every few seconds therefore causing games such as Gotham City Imposers to go to 0 fps every like 3-5 seconds and then right back up to its usual. I don't know if it's because i reformatted my PC because i've even tried cccleaner to...
I barely installed my Corsair 430-Watt and installed my R7 250, after a few days I returned the R7 250 because I noticed it wasn't the 250x. I returned it a few days ago, and I took out the software of the R7 250 and the graphics card out (In order to get a refund.) after I took out those two I...
Toshiba A205-S5831 BIOS upgrade stopped at 11 -17 and froze. No other choice but power off which pretty much doomed at that point. What recovery options do I have to get BIOS back to original state?
I've newly joined this site although i've been looking it up for tech-related stuff for many months now..
Well, i wanted to know if the XFX HD 5750 supports Intel-build machines or not..or does it support only AMD-build machines?
I want to assemble a special computer games heavy.
This is my computer specs
-CPU- Athlon II X4 635
-Mobo- 880G Extreme3 Or 880GMA-E45 ? :??:
-RAM- G.SKILL F3-12800CL9D-4GBRL PC3-12800
Gaming Series - Ripjaws
-HDD- WDC SATA II Green...
Hello,
I recently got a 4870x2, and it's performed well for the last couple of weeks. But my friends suggested that it would perform much better if I flashed it with the ASUS Top BIOS. Being stupid enough to get talked into it, I tried flashing it using ATIFlash and DOS. I flashed it with the...
Just installed a Noctua NH-D14 push , pull on to a Q9550 and # 3 and 4 cores read , at start up and idle 32 deg. celsius.When loaded they finally wake up , but when unloaded again they settle back down to 32.# 1 and 2 are reading 22 at idle and are fluctuating normally,as I am writing this there...
what is everybody's opinion on the best games that they have played :?:
my list is probly :arrow:
1. Half Life 2(IMO the best game ever)
2. HL2 episode One(short but still awesome)
3. Quake 3 Arena(game ive played the most EVER)(first game i got for pc)
4. UT2004
5. The Punisher
6. Fear
6...
I'd like to thank all in advance for any advice that is given, whether it helps or not.
I've been messing with my Dell XPS M1210 for over a week trying to figure out why it won't run a game smoothly. The problem is that the CPU (Intel Mobile Core 2 Duo T7200, 2.0 Ghz) frequency will rarely go...
Archived from groups: alt.games.morrowind (More info?)
I've been looking at mods lately, but I'm a little reluctant to add any more
at this point. I've added only a few, and it seems to have seriously
destabilized the game. I ran the TESTools program to merge the Level Lists,
but I'm not...
Does anyone expect to see 4890 cards?
These are clearly my speculations but from all the pre-release speculations of specs of the new cards some turned out true some turned out false. However I am little surprised that the 4870 are clocked at only 750/1800. Isn't it suspicious
I have read a...
Archived from groups: microsoft.public.windowsxp.newusers (More info?)
I have just had to reformat and reinstall WinXP Pro. Now I can NOT install
Movie Maker 2.
Is this some kind of joke Microsoft is playing LOL. Is the only way to get
Movie Maker 2 is by installing SP2?
Archived from groups: alt.sys.pc-clone.compaq (More info?)
I've got a Compaq AP500 professional Workstation with the following
specs:
Dual PII 400Mhz processors
512MB RAM
Two 4.3GB Wide-Ultra SCSI-3 drives
ELSA Synergy II AGP video + onboard video
32X IDE CD-ROM
325 watt Compaq proprietary...
I have a mac pro and do a lot of uploads and downloads of media files, the problem is my ftp client software and my other clients are so fast efficient that i run into this problem where i have no bandwidth left for Opera, so while my downloads are blazing i can't parse a youtube video unless i...
I like to watch Netflix in the country that I will be going into for vacation. But that country has not support netflix. Can I trick the server to think that my IP address is still in the USA??? please let me know
Archived from groups: microsoft.public.games (More info?)
i cannot get half my games or programs to download due to this error i dont
know what to do gateway dosent seem to help much!
I just updated the BIOS on my IS7 motherboard and the computer locks up when it gets to "Verifying DMI Pool Data". I've cleared the CMOS twice now but with no affect. Also, I was stupid and backed-up the old BIOS but not onto a floppy. Any ideas?
Thank you.
Archived from groups: microsoft.public.windowsxp.messenger (More info?)
When I log into Microsoft Messenger I receive the folowing message:
Signing into communications service failed because the service is
temporarily unavailable. Please try again later. At the top of the Windows
Messenger...
I am looking to build a system here in the next month or so, and I have a dilemma. It will be a gaming machine first, and in distant second, everything else. The first decision is between a the 512k cache 2.4 ghz 3400+, or the 1mb cache 2.2 ghz 3400+. Same price, so which is better for gaming...
Archived from groups: alt.comp.periphs.mainboard.asus (More info?)
I just flashed my A7N8X Deluxe v.2.0 to the 1007 bios (late, I know,
but didn't really feel I needed it updated until I ordered a SATA hard
drive to replace my current one). I used the Alt-F2 method and all
seemed to go well...
Guest
Thread
Motherboards
MSI-Microstar
Orion
Packard Bell
Socket
yea here i am again. I figure you all hate me. Thats cool. But noe VoodooPC id rolling. Anyone check out their intercool water cooling system they just got? TomsHardware even wrote a article on it.
Yes Voodoo's are overpriced. Yes you can build one close to its performance for much less.
But...
Hi,
I am working on a build (my first) of a gaming PC. I have already had a bunch of helpful advice from the guys at the MaximumPC Forums in this thread and I think I'm almost completely set as to what parts I'm getting, but I thought it would be a good idea to get a second opinion anyway, just...
I've had my Samsung SyncMAster 2493HM Monitor for about a year. Recently it has lost a lot of brightness. It isn't nearly as bright as it used to be. Has anyone had this happen to them and what can I do about it? I'm still under warranty with samsung. Has anyone had any experiences with...
I've had my ratpadz GS for a few months now, and I just noticed that it has lost a significant amount of its slickness. I noticed this when I scooted the mouse to a corner. In the area where I typically move the mouse, it is like a normal mousepad. In the corners where I don't use the mouse...
Hi all! I recently bought a new CPU cooler and before installing it I wanted to see what the stock one is capable of. I ran Prime95. After 4 minutes 45 seconds I stopped Prime95 because CPU reached 97 degrees. Is this normal? No overclocking was done. My case is Antec 900 so I guess there is...
Archived from groups: microsoft.public.windowsxp.print_fax (More info?)
I have tried pausing and restarting,but I can only get it
to send by restarting pc
Hi, I know this CPU isn't disponible but some people on the forum told me I was better wait for this CPU which is priceless than the i7. I need to know how much money I spend in my computer and, with almost no experience in that, I can't say what's the regular fan needed for a "normal"...
Archived from groups: alt.games.baldurs-gate (More info?)
SPOILER SPACE:
10
9
8
7
6
5
4
3
2
1
0
Do you ever get to meet Kelvim a second time, or indeed Mirena? I
met them once in Saradush - the town which is, of course, now
destroyed. Do we ever find out whether they escaped...
Hi 2 days ago i bought i5 3570..wanted to buy i5 3570k but couldn't afford Z77 based Mobo or didn't need 3570k's power for what i do..Anyways my cabinet is Zebronics Bijli...Mobo is Gigabyte B75 d3h 1.0..The cpu perf is good but i am worried of the temperature..Far cry 3 -65 degrees on core 3...
I have overclocked my 3570k but my issue is that i am using a asrock z68 pro3 gen3 motherboard and i dont seem to have Load line calibration, nor do i have manual voltage control. What i have done is simply set the multiplier to 44 and set offset voltage control to +100. I have a stable...
I've had this computer for about 2 years: http://www.newegg.com/Product/Product.aspx?Item=N82E16883229221 only adding on another 6870hd card for crossfire and replacing the ram.
Since I got it I've been experiencing constant freezing/blue screen issues like the numerous other people that have...
Okay, so my mother board is lga 1156. I really do not want to change it so I just decided on getting a first gen intel i7 processor. Do you think this is a bad idea to buy this i7 860 refurbished from amazon...
I have an Acer 5745PG with hydro BIOS (I think that is what's it is called). It is version 1.1. i changed my bios setting to discrete instead of switchable graphics, but my graphics card crapped out and so did my standard vga driver so i am stuck with a blank screen. I need to change my bios...
Hello,i have Intel(R) G41 Express Chipset 256mb
2g ram Intel(R) Celeron(R) CPU 2cpu ....what can add in my pcl and plc express #16 slot to bust grafic......
:hello: When i play games that makes my components running on high load i experience hearing my PSU's transformer buzzing. Should i be worried? I realized this ever since i upgraded to a Radeon HD 6850 from a GeForce GT 240. My power supply is a Corsair CX430. I think this is most likely...
Hey I have a Gigabyte-H61m-S2PV mobo and i was wondering is this holding back my i5 2500k cpu? should i upgrade, But i'm afraid too as i have never built or upgraded any pc before.?