Striker Extreme

In french... <A HREF="http://www.pcinpact.com/articles/a/148/19.htm" target="_new">Most interesting part!</A> <A HREF="http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=fr_en&trurl=http://www.pcinpact.com/articles/a/148/1.htm" target="_new">BabelFished, Whole article...</A> Asus...

Any suggestion for the timings of this stick thnkx a lot guys. Dual Channel

Hi, New computer has been setup and running for about 2 weeks now. It's perfectly fine and not overheating, though i'm wondering about the temperature the CPU should be on load. Right now, it's running around 48-50°C but the CPU fan is running at 5600rpm and is just a bit noisy. I'm wondering...

What stores around might carry the E8400? I rather not wait for the Q9450... especially with quad cores not having the advantage right now. Might upgrade later. There is no Fry's around here.

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) I have a P4P800E-Deluxe and a Turtle Beach Santa Cruz sound card. In trying to run down some problems as to why the Max Payne game is not working on this set up, I have reformatted the drive and tried out the onboard audio. I...

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?) Hi, I just changed my barton 2500+ with a barton Mobile 2600+ tested to run @ 200x11, but my board only boots up @100Mhz fsb and there's no way to change it! If i try setting a different fsb in the bios the board won't boot...

have a GA-K8ns socket 754 board and would like to add some pc4000 along with my pc3200 ram for overclocking in the future will this ram work on my board??

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) To enable RAID 1 on the P5WD2 Silicon Image RAID controller do you need to have SATA drives hooked up to the SATA_RAID2 internal connector and another to the external SATA connector? Otherwise I cannot see how one would set it...

Archived from groups: alt.comp.periphs.mainboard.shuttle (More info?) I just got an SS51G and I put a P4 2.6GHz in it (version with hyperthreading). When I boot I don't get 2.6GHz, I only get 1.3GHz. Benchmarks confirm it's running at half speed. I'm pretty sure I have the latest bios (the...

Yes another will you take a look threads but everyone loves the help and suggestions! =D I want to build a decent gaming system with a said budget of 500-700. I have looked at newegg.com for my shopping needs but am confused as to what would suit me best. I am new to building systems and this...

Archived from groups: alt.comp.periphs.mainboard.gigabyte (More info?) Hello, I've just built a new PC together: - Mainboard: GigaByte K8VT800 Pro - CPU-cooler: Arctic CPU Silencer Ultra 64 TC - Power supply: Enermax EG365AX-VE(G) FMA Both the CPU Cooler plug and the power supply fan plug...

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) What is the biggest IDE HD that will work on this board. I'm trying to use 160GB (External Firewire) and Windows only see and partition 128GB. All my SATA drives are being detected correctly including SATA 250GB WDC drive...

Will a x1950XT 512MB run on this system (im worried bout my 12v Rail @ 18A) Thermaltake TR2 430W Athlon x2 @65W 2 Gigs ram 1 SATA HDD

Hi, so I am getting a CMOS checksum bad error. specs: Mobo: MSI 870-G45 CPU: AMD Phenom II Black Edition - 6 cores RAM: Mushkin enhanced silverline stiletto 4x4GB DDR3-1333 GPU: XFX RADEON 6950 2GB 750w PSU OS: Windows 7 professional (LEGIT version) What i've done: Replaced the cmos battery...

I am going to order a new computer within a couple of weeks. I have done some research and landed on a preliminary build. The biggest questions i have had are whether to choose socket 1366 or 1155 and whether to go for a faster RAM. Premisis for asking advice : 1) I dont post a money limit...

i don;t know if i should post it here but here goes. after i installed 8800 gts 320mb i can't run any live linux Cd's any more.

Archived from groups: alt.comp.periphs.mainboard.aopen (More info?) Hi, I have a problem with the startup password. At first I changed the password from system to setup and then I entered the password. After that I cannot change it back to system. Well I can change the settings i bios, but it...

I want to build a system based around the AMD 64 chipset and was all set on the MSI K8T Neo motherboard until I started looking around a little more tonight. I want to use the 3200+ model, but it sounds like the K8N Platinum is the board to go with. The thing is, everywhere I read about it, it...

Archived from groups: alt.comp.periphs.mainboard.epox (More info?) I just got my new board a little less than 2 weeks ago now. Everything has been find up to this point. However, this morning I noticed some very odd behavior: when I turned on my PC, it just sat there for a full minute showing...

Hi, i just wonder how a GPU work, if anyone knows because i tought about Nvidias PhysX thing and CUDA and so on. And i wonder how the cards calcuates the physics and other stuff on the cards. Is it Like this: (for exampel) GF8500GT has 16 Shader-CPU's and the Shader-clock is on 900MHz. So is it...

Is there any other company that offers a gpu trade up other than evga?

Archived from groups: alt.comp.periphs.mainboard.gigabyte,alt.comp.periphs.mainboard.giga-byte (More info?) Where can I get more info about what changes a particular Gigabyte BIOS upgrade contains? For my GA-6BXE I see that version F2 adds support for 75 GB. I want to know more about the...

Hello, it seems my motherboard needs to be replaced, and I'm trying to find a suitable upgrade, or even anything decently priced that's still compatible with my HP Pavillion P6142P. I'd rather not spend $200 on the same motherboard.. used. Thank you.

The manual says to pull on the opening at the bottom of the front panel. I'm pretty sure It's talking about the whole on the bottom of the metallic front panel. I just want to make sure I don't rip my case apart. As it seems that pulling it off from the way I'm thinking will take quite a bit...

Hi I would like to ask if I have two sticks of 512mb ram running dual channel mode, will I have 512mb of ram or 1gb of ram for my applications? thanx A fine day!

Got another mobo and on the PCB, around the PCI it say a7n8x rev 2.0 but in software utilities like sandra and 3dmark03 it say this is a a7n8x2.0 rev 1.XXX Is this the rev 1 or 2 a7n8x deluxe? How else would I tell? I think I got hosed with this mobo. Thanks... Barton 2500+ @ 2200mhz...

I have recently set up my new system. I've had many issues all summer, (been through a couple motherboards because of a weird smiley-face artifact thing when trying to save to CMOS) but now it's down to my RAM, I hope. First, here are my basic system specs: AMD Athlon XP 2800+ Chaintech...

I have now built 2 systems with GA-7N400pro (nforce2) and 1 with GA-7N400-L1 (nforce2) and all 3 boards have been unable to run stable in dual channel DDR333 configuration. I have tried 3 different types of memory and I always used identical pairs of them. These are the types tried: Lemel (PMI...

For my new C2D build, I narrowed down my choices to 2. Gskill or Patriot. My friend recommended me the Gskill for its good overclocking potential and low timings. I then saw the DDR800 review here and saw the Patriot came out on top. Now I need to select one. Price is not a factor since they are...

I have a ATC6310V-01 (slot1)Atrend mobo it has automatic detection of FSB 66/100/133 my local shop suggested a 750 coppermine P# for this mobo saying that these things get confused and just dont work if you put a tualatin cpu with a slot adapter in them and tells me to buy aused p3750/fsb100 or...

I may have screwed the pooch on this MB, but what I did was inadvertently leave the cmos clear jumper on "clear" position and start the machine up. It now only operates the fan and lights, no noise or screen activity. Is there any hope for this machine? It is an EPOX EP-8K7A+ w/raid, using...

Hi! I have Soltek 75DRV-4 and I have finally understood that 256 Mb PC2100/DDR266 just isn’t enough. Today I use Samsung memory and it works great. Now to the question. What kind of memory can I use with this motherboard? Do I have to buy "Original"-memory? Or can I just buy any 512 MB PC2100...

http://www.foxnews.com/opinion/2013/02/15/why-dr-ben-carson-is-my-hero-it-not-what-think/ These are things Ive read for a long time, these responsibilities, and was taught and raised by. We need to quit kicking our strengths, and start re indorsing them, tho not to leave others behind

Hi, i'm going to buy a P4 2.4(or 2.5 depending on the price)and i'm in the biggest dilemma ever........ which Mobo??????????? my ideas were: 1)Abit BD7-II raid i845E Agpx4 Ddr Fsb533 A 133 Lan 2)Asus P4S8X-S p4 SIS648 Fsb533 AGP8X LAN SATA Raid 3)Abit BD/-II i845E Ddram 533 Lan 4)gigabyte...

Archived from groups: alt.comp.periphs.mainboard.asus (More info?) I have been out of the build your own, and upgrade loop for several years so current advice is needed here. I need to replace my Asus P4T and memory with another Asus motherboard and memory due to the zif socket. I hope...

Need Experts advice on my ASUS mobo ------------------------------------------------- I have the opportunity to change my CPU from a P4 2Ghz/100 to a P4 2.4Ghz/133 for only a couple of bucks so my question is: Does my mobo work with P4 2.4Ghz/133 CPU ? Any other troubles that I should think...

Hi guys, I am a final year undergraduate studying Industrial design and i am redesigning the computer case... Perhaps some of you would have time to answer some very quick questions to help me on the way? In a new case you bought.... 1).How many 5.25" drive bays would you require? 2).How many...

Im going to build another system and not sure do I go AMD or Intel P4. Im just interested in what motherboard should I use. Im sort of leaning towards P4, and something with DDR ram. Im not sure if RDRam will still be around or will it fade out. Id really appreciate any help/comments. Thanks.

Hi all, With a FX5200 (winfast) which driver is the most suitable? I am using the default driver at the moment, but i heard that by installing a new driver, would increase some performance... also, it default clock is 250/473, and i used winfox the o/c it to 300/500, u think i could go higher...

I just need your inputs on which motherboard I should buy because mine just died recently. I'm looking for a microATX that supports ddr3 memory Other Specs Processor - amd phenom ii x4 810 Memory - 8G ddr3 Graphics card - Nividia GTX 550Ti needs PCI-E 750G hard drive Price range - $120-$170