Sun Microsystems

So I have this really old toshiba satellite laptop I don't use anymore, but i do for times when the one I'm on now stops working or goes in downtime (I'm doing other stuff to it). I have an old windows xp cd that it came with and I wanted to put in a fresh install of windows xp since it has all...

Better safe than sorry. Thank You for answering. (The Windforce 3x cooler one)

Archived from groups: alt.sys.pc-clone.dell (More info?) I would REALLY appreciate some help with this. I spoke to a person from Dell for over an hour, all he managed to do was to really screw up my computer. I had to get the memory wiped and the problem STILL is there. My System Dell 8200...

Hello, I installed windows 8 and sound is not anymore

Archived from groups: alt.sys.pc-clone.gateway2000 (More info?) When I was running 98SE, I always backed up my outlook express messages which were neatly located in a directory windows. Each account I had in outlook express had its own directory and all I had to do was back those directories...

Hey, So I just booted up my PC from sitting for a few months, and my windows 7 would boot to log in screen, and I would log in no problem, But then Explorer would not start up. I could access Task manager, but could not start Explorer as a new task. So I have been trying to install Windows 8...

Hello Im looking at http://www.newegg.com/Product/Product.aspx?Item=N82E16824236293&Tpk=VG278HE Anyone have any experience with this monitor? Good or bad. Im also looking for any other screen that would be recommended for $500 or less.

So, I am building a new gaming PC this Christmas and I haven't been able to find information about Windows 8 specific enough that will allow me to make an informed decision on whether or not to, you guessed it... get Windows 7 or Windows 8. The system I am building is built specifically to run...

help me search for one under the $200? i tried newegg but they do not have a IPS/VA/TN filter. i would like dvi.vga.hdmi (vga not so much) tilt,swivel would be nice but not needed response time 4 or lower? ill be doing gaming on this i hear 4 or lower is a MUST?

Beginners' question: old scanner (running fine on W7), new 64-bit machine/ O/S (W8) - how do I make it work? I can't find any drivers listed, have tried Canon site & looks like they can't be bothered supporting old stuff - even though the scanner works fine (I object to just ditching perfectly...

On my previous desktop computer, one of my IDE hard disks was partitoned into Drive C and Drive D. Each of the partitions had an installation of XP Pro so it was a dual-boot system. My desktop system no longer works so now I have a laptop system with Windows 8. However, I have some important...

Will mantle be on windows 7??? I want to make sure before I purchase the r9 graphics cards.

When i turn my sanyo 42in. Tv on, it makes a click noise, then it turns off making tha same click, and it wont stay on.

which led monitor is best for gaming and movies?dell st2220l,benq g2220hdl,v2210...or any other suggestions below 10k

Hi I came home for lunch today and my monitor started to act up. It would flicker a little, like the backlight was going out, and then the picture would just go dark. If i powered it off and then powered it back on again, the picture would come back for about 2 seconds, and then shut back off...

Ok so I have had a Razer Diamondback for possibly 5+ years . I LOVE this mouse. I can't seem to part with it, but I know I will need to because it will eventually lose support and/or die. Things I love about the mouse: great speed variety, on-the-fly adjustment with on screen display, and most...

Hello, My 1980 Missile Command upright monitor died. Would it work to connect the MC's 6 pins (R,G,B, GND, H-Sync, V-Sync)into the corresponding input pins of a VGA monitor's standard connector using only a (custom) adapter cable?

I'am sorry new @ this just reaching out to see if anyone has some good info that might help me with brand new Hp580t that died 3week's old they sent repaire to home he replaced m/bord still dead sent it to hp they sent it back they could not recreate prob/but they replaced M/bord that's 2 mother...

I have a mildly used Canon LBP5000 laser colour printer. In recent weeks it has developed a cyan streak down the right side of the printed page. This has grown in size. I opened the printer and saw that there was a corresponding band on the cyan roller and a heavy streak on the transfer belt...

I wana know if i can connect my computer to my Ups . My Power SUpply is 700w but soon to be 850 or 900 W So let me know if i can use it? Ultra ULT31502 Xfinity 1000VA 600w UPS

I'm in the market for a new monitor. I do graphic design for a living, and I'm tired of working with monitors that can't be accurately color corrected, have side to side and up and down fading and light bleeding from the monitor edges. I've used Dell, Samsung, NEC, Lenova, LG to mention a few...

Hello, My old HP's cartridges have given up after 3 or 4 refills and I definitely want a new printer. I need a new multifunction printer, for home use. I do take high quality photos, and I do have a decent eye for detail, but I never end up actually printing more than 10 of them per year. I...

Hello, i have bad eye sight so what would be best to magnify my screen

Hi, My new Benq 22inch LCD monitor (model:G2220HD) flickers when i play music loud on my speakers(JBL stereo speakers).This flicker is more prominent when the monitor has a dark tones being displayed. Has anyone faced similar issues.Could someone help me out please. PS: My UPS has the earth...

I just purchased a new samsung LCD to use as my computer monitor. When I connect the computer from vga to the vga pc input on my tv everything works fine. When I connect from my computers DVI out to the HDMI in on the TV picture looks fine but the edges are cut off. I can just barely see the...

i have a word document I need printed mirrored or horizontally flipped. Am mac and using a canon mp560. Please help?

I've been doing a lot of research on 120hz monitors because I really want one to play fps on my new i-5/gtx 460 build. I love the smoothness of the 120hz monitors but Ive read mixed reviews as far as color accuracy. I am a freelance graphic designer (new to the market and I'm doing it as a side...

Are the picture quality good enough? I used to watch anime 720p videos on computer and youtube. And gaming for games like left 4 dead 2, starcraft 2, and any directx 10/11 games. http://www.ebuyer.com/product/177050 How it does compare to this the 23 inch monitor from DGM...

Hi there, I'm in the market for a new monitor for my gaming rig and I was hoping someone could help me out. Doesn't have to be anything outrageously amazing as I don't have a huge budget, but I would like something respectable. I don't really have a specific size in mind. I have a GTX 260 and I...

i want to run 3 monitors at one time with 5750 radeon card but it only pick up 2

I'm thinkin' about getting these... Logitech G19 http://www.newegg.com/Product/Product.aspx?Item=N82E16823126053&Tpk=g19 and Razer DeathAdder http://www.newegg.com/Product/Product.aspx?Item=N82E16826153055&cm_re=death_adder-_-26-153-055-_-Product Also, one of these... Steelseries QcK+...

so I just recently built my first system, and one of the annoying system is that most of the time the display wont fit to the whole screen. there is about a half inch box around the whole thing, but that's only most of the time. when I was doing some overclocking, occasionally the display would...

We are using windows 2000 for our lotus note server for a years. now the problem is everytime we use to switch it on and when the loading was done i get a blank monitor never get to the windows, but the PC server is still running and usable to our end user, but we cannot monitor and configure it...

This issue is quite silly but its still an issue: I have two LCDs: Samsung 2233 BW and Philips 190c1sb Thing that SHOULD NOT happend is when I turn off PC attached to any of these monitors LED lamp keeps blinking, forever! Is there a way to turn this annoying LEDs OFF ?

I just bought the life cam cinema which has pretty good video for a webcam but the microphone is not that great. I bought the Rode Podcaster to use for podcasting and videos. Can I set up the Life cam to only use my Rode Podcaster microphone instead of the internal one on the life cam? thx.

Which of the following is overall better all purpose monitor ? 1.Dell S2209W 2.Samsung P2250 3.AOC 2236vw 4.Samsung 2233SW

Just wondering if anyone happens to have an EDID file for the vga and dvi inputs fo rthe 2232BW? My edids are corrupt :(

Archived from groups: comp.periphs.printers (More info?) Howdy....bought the above mentioned and want to know can I use normal media to print on or do I need specially coated media, and another thing, can I download media labels and use them to print my media with using this printer, can't find...

Hey, I have been scared to buy a LCD monitor for my computer because I have a poor confidence in them. Not because they are not great just because I want to get something that would last me a good time. I am a gamer so I want an LCD screen that can be good for gaming. I am looking for around...

when i put border on the whole page the lower part is not printed (the lower horizontal line )